3D-Fuel

Buzzed Beer Filament by 3D-Fuel - 3D print with beer filament! Buzzed Beer Filament is a beer-based 3D printing filament made using waste by-products from the beer making process. Buzzed uses beer leftovers to create a special 3D printing material. 3D...

Dow OBC (Olefin Block Copolymer) NOTE: Because DOW OBC is such a low-density material, the spool weights are lower than you might expect, but a 366g spool of OBC will print the same amount of parts as a 500g spool of PLA. It's an excellent...

1.75mm Dyna-Purge® 3D Clean™ Filament Sticks 50 sticks of Dyna-Purge® 3D Clean™ 1.75mm filament arrives in an easy-open tube. Use Between Materials and Colors: Designed to purge all resins used in 3D printing. It is easy to use...

2.85mm Dyna-Purge® 3D Clean™ Filament Sticks 50 sticks of Dyna-Purge® 3D Clean™ 2.85 filament arrives in an easy-open tube. Use Between Materials and Colors: Designed to purge all resins used in 3D printing. It is easy to use...

Entwined v2 – Hemp Filament by 3D-Fuel Now updated with a new, improved formulation! 3D-Fuel has reduced the particle size of the hemp material and increased the percentage. This will enable printing in a much wider variety of 3D printers,...

Glass Filled PLA Filament by 3D-Fuel  3D-Fuel tested 3D printed parts in Standard PLA and Glass Filled PLA and found that Glass Filled PLA is: 1.4 times stronger 1.3 times tougher 1.9 times more flexible Like standard PLA, Glass Filled PLA...

3D-Fuel HydroPro™ Water Soluble Support Material - 1.75mm 500g HydroPro™ dissolves quickly - it only needs to be soaked for 1-2 hours to easily work supports off by hand, or 2-6 hours to dissolve completely. It is easier to...

HydroSupport – Water Soluble Support Material HydroSupport dissolves completely in water and is much easier to print with than PVA filament. Because it dissolves in water, HydroSupport only needs to be soaked a few hours to easily work supports...

Landfillament Upcycled Garbage Filament by 3D-Fuel Landfillament is a 3D printing filament made using upcycled garbage. The upcycled garbage, from which metals have been removed, is run through a process called pyrolysis – a...

3D-Fuel Pro PLA  Color: Industrial GraySize: 1.75mmWeight: 1kgGrade: NatureWorks™ 3D870 Ingeo PLA Compare Standard, Workday and Pro PLA 3D-Fuel Pro PLA (APLA+) is a filament engineered with the properties of ABS, but the...

3D-Fuel Pro PLA  Color: Iron RedSize: 1.75mmWeight: 1kgGrade: NatureWorks™ 3D870 Ingeo PLA Compare Standard, Workday and Pro PLA 3D-Fuel Pro PLA (APLA+) is a filament engineered with the properties of ABS, but the printability of...

3D-Fuel Pro PLA  Color: NaturalSize: 1.75mmWeight: 1kgGrade: NatureWorks™ 3D870 Ingeo PLA Compare Standard, Workday and Pro PLA 3D-Fuel Pro PLA (APLA+) is a filament engineered with the properties of ABS, but the printability of...

3D-Fuel Pro PLA  Color: Ocean BlueSize: 1.75mmWeight: 1kgGrade: NatureWorks™ 3D870 Ingeo PLA Compare Standard, Workday and Pro PLA 3D-Fuel Pro PLA (APLA+) is a filament engineered with the properties of ABS, but the printability...

3D-Fuel Pro PLA  Color: Snow WhiteSize: 1.75mmWeight: 1kgGrade: NatureWorks™ 3D870 Ingeo PLA Compare Standard, Workday and Pro PLA 3D-Fuel Pro PLA (APLA+) is a filament engineered with the properties of ABS, but the printability...

3D-Fuel Pro PLA  Color: Midnight BlackSize: 2.85mmWeight: 1kgGrade: NatureWorks™ 3D870 Ingeo PLA Compare Standard, Workday and Pro PLA 3D-Fuel Pro PLA (APLA+) is a filament engineered with the properties of ABS, but the...

SnapSupport™ Breakaway Support Material - 3D450 from NatureWorks™ Size: 1.75mm Weight: 1kg Grade: NatureWorks™ Ingeo 3D450  SnapSupport is a new breakaway material made with NatureWorks Ingeo...

3D-Fuel Standard PLA  Color: Midnight Black Size: 1.75mm Weight: 1kg Grade: NatureWorks™ Ingeo Standard PLA Compare Standard, Workday and Pro PLA Print Settings: Printing Temperature: 185-215c Bed...

3D-Fuel Standard PLA  Color: Daffodil Yellow Size: 1.75mm Weight: 1kg Grade: NatureWorks™ Ingeo Standard PLA Compare Standard, Workday and Pro PLA Print Settings: Printing Temperature: 185-215c Bed...

3D-Fuel Standard PLA  Color: Fire Engine Red Size: 1.75mm Weight: 1kg Grade: NatureWorks™ Ingeo Standard PLA Compare Standard, Workday and Pro PLA Print Settings: Printing Temperature: 185-215c Bed...

3D-Fuel Standard PLA  Color: Grass Green Size: 2.85mm Weight: 1kg Grade: NatureWorks™ Ingeo Standard PLA Compare Standard, Workday and Pro PLA Print Settings: Printing Temperature: 185-215c Bed...

3D-Fuel Standard PLA  Color: Industrial GraySize: 1.75mmWeight: 1kgGrade: NatureWorks™ Ingeo 4043D Compare Standard, Workday and Pro PLA Print Settings: Printing Temperature: 185-215cBed...

3D-Fuel Standard PLA  Color: Island Fuchsia Size: 1.75mm Weight: 1kg Grade: NatureWorks™ Ingeo Standard PLA Compare Standard, Workday and Pro PLA Print Settings: Printing Temperature: 185-215c Bed...

3D-Fuel Standard PLA  Color: Ocean Blue Size: 1.75mm Weight: 1kg Grade: NatureWorks™ Ingeo Standard PLA Compare Standard, Workday and Pro PLA Print Settings: Printing Temperature: 185-215c Bed...

3D-Fuel Standard PLA  Color: Snow White Size: 1.75mm Weight: 1kg Grade: NatureWorks™ Ingeo Standard PLA Compare Standard, Workday and Pro PLA Print Settings: Printing Temperature: 185-215c Bed Temperature: 0-60c MSDS...

3D-Fuel Standard PLA  Color: Tangerine OrangeSize: 1.75mmWeight: 1kgGrade: NatureWorks™ Ingeo Standard PLA Compare Standard, Workday and Pro PLA Print Settings: Printing Temperature: 185-215cBed...

3D-Fuel Workday ABS Color: Midnight Black Size: 1.75mm Weight: 1kg ABS is used for high strength applications and is a petroleum-based material product, so it holds up well in a variety of environment. ABS requires a heated bed and works best with...

3D-Fuel Workday ABS Color: Snow White Size: 1.75mm Weight: 1kg ABS is used for high strength applications and is a petroleum-based material product, so it holds up well in a variety of environment. ABS requires a heated bed and works best with an...

1.75mm 1kg Midnight Black Workday ASA Filament by 3D-Fuel The ideal 3D printing material for outdoor and automotive applications, Workday ASA (Acrylonitrile Styrene Acrylate) has excellent temperature, UV, and chemical resistance. ASA is used for high...

1.75mm 1kg Snow White Workday ASA Filament by 3D-Fuel The ideal 3D printing material for outdoor and automotive applications, Workday ASA (Acrylonitrile Styrene Acrylate) has excellent temperature, UV, and chemical resistance. ASA is a petroleum-based...

3D-Fuel Workday PLA  Color: Industrial Gray Size: 1.75mm Weight: 1kg Grade: NatureWorks™ Ingeo 3D850  Compare Standard, Workday and Pro PLA 3D-Fuel Workday PLA (APLA) filament is stronger and more heat resistant than Standard...

3D-Fuel Workday PLA  Color: Midnight Black Size: 1.75mm Weight: 1kg Grade: NatureWorks™ Ingeo 3D850  Compare Standard, Workday and Pro PLA 3D-Fuel Workday PLA (APLA) filament is stronger and more heat resistant than Standard...

3D-Fuel Workday PLA  Color: Snow White Size: 1.75mm Weight: 1kg Grade: NatureWorks™ Ingeo 3D850  Compare Standard, Workday and Pro PLA 3D-Fuel Workday PLA (APLA) filament is stronger and more heat resistant than Standard PLA...

3D-Fuel Wound Up™ Coffee Infused Filament - 1.75mm 500g Wound Up™ is a coffee infused 3D printing filament from 3D-Fuel's c2composites line. It is made using waste byproducts from coffee.  Beautiful brown color  Noticeable...