MINI/+

Micro Swiss CM2 Nozzle The Micro Swiss CM2™ Nozzle is an ideal nozzle for all applications. The core of the nozzle is made of high-temperature Copper Chromium Zirconium and plated with an Electroless Nickel Plating. This special alloy retains...

PB Select™ Plated Copper Nozzle High precision copper nozzles is great for printing everything from PLA to PEEK.Copper has a much higher thermal conductivity than brass and these nozzles can handle high temperatures (up to 495c)...

CopperBlock™ Hot Block for Prusa MINI Nickel composite coated copper hot block for increased thermal conductivity.  Includes:Copper heater block (1 pcs)Set screw (1 pcs)Heater clamping screw (1 pcs) Fits:Prusa MINIPrusa MINI+ Note: After...

Slice Engineering Copperhead Heat Break for Prusa MINI/MINI+ The Copperhead Prusa MINI heat break is bimetallic, made of a copper outer body and an interior steel needle, which gives this heat break better cooling performance, allowing for a...

E3D V6 ObXidian Nozzle V6 nozzles are designed for use with the E3D V6 heater block. Use small nozzle orifices to achieve fine details or larger nozzle orifice sizes for more substantial, stronger 3D prints. Includes: Nozzle of selected size (1...

3D Print Cleanup Tool This deburring tool is great for cleaning the brim off the long, straight edges of your 3D prints. We find it easier to use than an Exacto knife, because the blade doesn't dig into the plastic print as easily. The swivel head makes...

Revo Cables for Prusa MINI/+ Includes: Heater cable (1 pcs)Thermistor cable (1 pcs) Fits (fits below printers with the Revo Micro hotend upgrade):Prusa MINIPrusa MINI+

Extruder Drive Gear (Motor Pinion) for Prusa MINI OEM Extruder Drive Gear (Motor Pinion) replacement for the Original Prusa MINI and MINI+ extruder motor. This drive gear sits directly on the extruder motor shaft. Includes:Extruder Drive Gear (Motor...

Prusa MINI Extruder Driven Gear (Filament Spur) Extruder Driven Gear (Filament Spur) replacement part for the Original Prusa MINI and Mini+. This is the driven/idler gear pushing the filament inside the extruder assembly. Includes: Extruder Driven Gear...

PB Select™ Idler Springs for Prusa Extruder Latch & MMU2S/3 Includes: Idler spring (2 pcs) Fits:MK2.5MK2.5SMK3MK3SMK3S+MiniMini+MMU2SMMU3 To replace this part, please consult the Prusa Assembly Manuals. Make sure to follow...

Prusa MINI/+ Filament Sensor (assembly) Includes:IR filament sensor 1 (pcs)IR filament sensor-Buddy board cable (1 pcs)Textile sleeve (Length: 220 mm, Width: 5 mm) (1 pcs)PTFE tube (1 pcs)MINI Fsensor box (1 pcs)MINI Fsensor cover (1 pcs)MINI...

Prusa X Axis GT Timing Belt Includes: Belt (1 pcs) Location: X axis Fits:MINIMINI+ To replace this part, please consult the Prusa Assembly Manuals. Make sure to follow the manual for your printer model.

Prusa Y Axis Timing Belt Includes: Belt - Y Axis (1 pcs) Fits:MINIMINI+ To replace this part, please consult the Prusa Assembly Manuals. Make sure to follow the manual for your printer model.

Prusa MINI Hotend Heatbreak This is an OEM Prusa MINI/+ hotend heat break. Includes:Hotend heat break MINI/+ (1 pcs)Thermal paste (0.5g) (1 pcs) Fits:MINIMINI+ Note: it is ONLY compatible with the Original Prusa MINI and MINI+. To...

Bondtech Stainless Steel Heat Break Kit for Prusa MINI and MINI+ Stainless Steel heat break for the Prusa Mini. Solves the heat-creep issues revealed during the extensive testing Bondtech performed on the Prusa Mini. The adjusted length of the...

Prusa Prusa MINI Heater Block This is an OEM Prusa MINI heater block. Includes:Heater block (1 pcs)Screws: M3x4 (1 pcs), M3x10r (1 pcs)Thermal paste (0.5g) (1 pcs) - Important! The thermal paste should not be applied to the hot side of...

PB Select™ Heater Block for Prusa MINI Includes:Aluminum heater block (1 pcs)Set screw (1 pcs)Heater clamping screw (1 pcs) Fits:Prusa MINIPrusa MINI+  Note: After changing hotend parts, a PID tune is recommended. 

Prusa MINI Hotend Heater Cartridge This is a replacement hotend heater cartridge (E3D 24V 40W). Includes: Heater cartridge - E3D 24V 40W (1 pcs) Specifications:Voltage: 24VWattage: 40WLength: 820 mm Fits:MINIMINI+ Note: The Molex...

PB Select™ Heater Cartridge for Prusa MINI Consistent heating through the cartridge for better heat distribution to the heater block Includes: Heater cartridge (1 pcs) Specifications:Volts: 24 VDCWatts: 40Leads: 820mm silicone...

Prusa MINI Heatsink This is a replacement heatsink for the MINI and MINI+. It is ONLY compatible with the Original Prusa MINI and MINI+. Includes:Hotend heatsink MINI (1 pcs)Threaded PTFE connection (1 pcs)Screws: M3x4 (3 pcs)Thermal paste (0...