Parts, Accessories & Supplies
-
Flange Screw - M3x5 mm (Phillips Head)
PB Select™
$0.59Flange Screw This screw is usually used to hold a bead thermistor in the heater block. Includes: Flange screw (1 pcs) Size: M3x5mm$0.59 -
Set Screw - M4x4 - Flat Point | 12.9 Grade
PB Select™
Now: $0.59Regular Price: $0.79M4X4 Set Screw 12.9 Grade Flat Point Uses 2mm Hex Key Driver Includes: Set screw (1 pcs)Now: $0.59Regular Price: $0.79 -
Set Screw (M4x5) for BLTouch | 12.9 Grade
PB Select™
$0.79M4X5 Set Screw 12.9 Grade, Flat Point. Includes: Set Screw (1 pcs) Fits: BLTouch Uses 2mm Hex Key Driver$0.79 -
Set Screw - M4X4 - Cup Point | 12.9 Grade
PB Select™
$0.79M4X4 Set Screw Used to secure the heater cartridge and heatsink of many Flashforge 3D printers. Includes: M4x4 set screw (1 pcs) Specs:12.9 GradeCup PointUses 2mm Hex Key Driver (not included) Fits:FinderFinder 2Guider 2Guider 2S...$0.79 -
Set Screw - M4X5 Cup Point | 12.9 Grade
PB Select™
$0.79M4X5 Set Screw 12.9 Grade Flat Point Uses 2mm Hex Key Driver Sold in units of one.$0.79 -
M5x10 Low Head Screw | Bondtech
Bondtech
$0.89Bondtech M5x10 low head cap screw for Bondtech Extruders, to be used with the M5 thread inserts or similar. Sold in units of one$0.89 -
Collet Clip (for 4mm Push Fit) Prusa, Bondtech, E3D V6, Revo - 2 pack | E3D
E3D
$0.99E3D Collet Clip Only fits this collet for 4 mm PTFE Tube. Includes: Collet clip (2 pcs) FitsE3D V6E3D Revo SixE3D Revo MiniE3D CRPrusa Bondtech$0.99 -
Hex L-Wrench - 1.5mm | Bondhus
Bondhus
$0.99L-Shape Hex Wrench Size: 1.5mmLength: 78.5mmBrand: BONDHUS Made in the USA$0.99 -
Hex Wrench - 3.0mm
Flashforge
Now: $0.99Regular Price: $1.29Hex Wrench (L Wrench) Includes: Hex wrench (1 pcs) Size: 3.0mmNow: $0.99Regular Price: $1.29 -
Set Screw - M4x3 | Bondtech
Bondtech
$0.99M4x3 Set Screw for Bondtech Extruder M4x3 for primary gear with inner diameter of 8mm. 12.9 Grade Sold in units of one$0.99 -
Spring for Titan Extruder | E3D Compatible
PB Select™
$0.99Titan Extruder Compatible Spring Fits: E3D Titan Extruder$0.99 -
Synthetic Grease with PTFE - 1 cc | Super Lube™
Super Lube
$0.99Super Lube 82340 - Synthetic Grease with SYNCOLON™ (PTFE) This small size pouch is great for lubing the filament drive gears on dual gear or orbiting gear extruders. Includes: 1 Pouch Size: 1 cc Contains no...$0.99 -
Thread Insert - M3 | Bondtech
Bondtech
$0.99Bondtech M3 Thread Insert Sold in units of 1 Thread size: M3 Insert Length: 5.2mm Recommended hole diameter: 4mm For easy installation use the heat-set insert soldering iron tip by Virtjoule$0.99 -
Thread Insert - M4 | Bondtech
Bondtech
$0.99Bondtech M4 Thread Insert Sold in units of 1 Thread size: M4 Insert length: 5.5mm Recommended hole diameter: 5.6mm For easy installation use the heat-set insert soldering iron tip by Virtjoule$0.99 -
Thread Insert - M5 | Bondtech
Bondtech
$0.99Bondtech M5 Thread Insert Sold in units of 1. Thread Size: M5 Insert length: 6.6mm Recommended hole diameter: 6.2mm For easy installation use the heat-set insert soldering iron tip by Virtjoule$0.99 -
Bearing (5x9x3mm) for E3D Titan & Titan Aero Extruder | E3D
E3D
$1.09Bearing - Titan/Titan Aero Extruder Replacement Titan/ Titan Aero bearings with an upgraded lubricant to increase the lifespan of your extruder. These bearings are sealed so there is no need for additional lubrication. Specifications:ID: 5mmOD:...$1.09 -
Hex Wrench - Ball End - 2.0mm
Flashforge
$1.29Ball End Hex Wrench - L Wrench Includes: Hex wrench (1 pcs) Size: 2.0mm$1.29 -
Hex Wrench - Ball End - 2.5mm
PB Select™
$1.29PB Select™ Ball End Hex Wrench - L Wrench Includes: Hex wrench (1 pcs) Size: 2.5mm$1.29 -
Shaft - 3x20mm - 304 Stainless Steel
PB Select™
$1.29Stainless steel shaft for Bondtech gear kits. Size: 3.0x20mm Sold in units of one.$1.29 -
Bowden Collet with Clip - 4mm
PB Select™
$1.39Bowden Collet with Clip Replacement Collet for our RepRap V6 Heatsinks Suitable for 4mm OD Bowden tube Fits: PB Select™ V6 Heatsink Orbiter Extruder V2.0 Includes: Push fit collet (1 pc) Collet clip (1 pc) Does not fit E3D heatsink.$1.39