Adventurer 4/Pro
Use the filter box below to narrow down the Adventurer 4/Pro parts you are looking for:
-
Flashforge Screwdriver - Phillips Head
Flashforge
$1.99Small Phillips Head Screwdriver This is the small screwdriver that comes with the accessory kit of many new Flashforge 3D printers Includes: Screwdriver (1 pcs)$1.99 -
Flat Cable for Bed Heater - Adventurer 3 Pro 2, Adventurer 4 Pro | Flashforge
Flashforge
$12.95Flashforge FPC Flat Cable for Build Plate Heater Runs from heated build plate to mainboard. Includes: FPC Cable (1 pcs) Fits:Adventurer 3 Pro 2Adventurer 4 Pro WARNING Pay close attention to the orientation of your...$12.95 -
Flat Cable for Bed Heater - Adventurer 4 | Flashforge
Flashforge
$12.95Flashforge FPC Flat Cable for Build Plate Heater Runs from heated build plate to mainboard. Includes: FPC Cable (1 pcs) Fits:Adventurer 4 WARNING Pay close attention to the orientation of your current cable...$12.95 -
Flat Cable for Print Head - Adventurer 4 Pro | Flashforge
Flashforge
$12.95Flashforge Print Head Flat Cable This is the FPC flat cable that runs from the print head to the mainboard. Includes: FPC Cable (1 pcs) Fits: Adventurer 4 Pro WARNING Pay attention to the orientation of your current...$12.95 -
Flat Cable for Print Head - Adventurer 4 | Flashforge
Flashforge
$12.95Flashforge Print Head Flat Cable This is the FPC flat cable that runs from the print head to the mainboard. Includes: FPC Cable (1 pcs) Fits: Adventurer 4 WARNING Pay attention to the orientation of your current cable...$12.95 -
Flexible Build Plate (Smooth PEI) - Adventurer 4 Pro | Flashforge
Flashforge
$33.95Smooth PEI Flexible Build Plate Flexible steel build plate with smooth PEI print surface on one side. Includes: Build plate (1 pcs)PEI print surface - installed (1 pcs) Fits: Adventurer 4 Pro$33.95 -
Flexible Build Plate - Adventurer 4 | Flashforge
Flashforge
$29.95Flexible Build Plate with Print Surface Includes: Flexible build plate (1 pcs)Print Surface (build tape) pre-installed (1 pcs) Fits: Adventurer 4$29.95 -
Front Door - Adventurer 4 | Flashforge
Flashforge
$24.95Front Door for Flashforge Adventurer 4 Acrylic Includes: Door with magnets (1 pcs) Fits: Adventurer 4$24.95 -
Glass Build Plate - Adventurer 4*/Lite | Flashforge
Flashforge
$29.95Flashforge Glass Build Plate One side is smooth, one side is textured. Includes: Glass build plate (1 pcs) Fits:Adventurer 4 LiteAdventurer 4 (with glass build plate) Notes:This is not an upgrade kit. If your printer currently has a magnetic...$29.95 -
Grease Packet - 3 Grams | Flashforge
Flashforge
$2.99Flashforge 3D Printer Grease This is the same grease that comes standard with many Flashforge 3D Printers. Size: 3 Grams Includes: Grease packet (1 pcs)$2.99 -
Hotend (Print Head) Housing - Adventurer 4 | Flashforge
Flashforge
$15.98Flashforge Hotend Housing (Shell) Includes: Top Shell (1 pcs)Bottom Shell (1 pcs) Does not include: Nozzle, air duct or any internals Fits: Adventurer 4$15.98 -
Hotend Assembly (Print Head) Adventurer 3 Pro 2, Adventurer 4 Pro | Flashforge
Flashforge
$74.95Flashforge Hotend Assembly (Print Head) Fully assembled. Includes:0.40mm Nozzle assembly (1pcs)Fan (1 pcs)LED light (1 pcs)Internal PCB boards and wires Fits: Adventurer 3 Pro 2Adventurer 4 Pro$74.95 -
Hotend Assembly (Print Head) Adventurer 4 | Flashforge
Flashforge
$74.95Flashforge Hotend Assembly (Print Head) Fully assembled. Includes:0.40mm Nozzle assembly (1pcs)Fan (1 pcs)LED light (1 pcs)Internal PCB boards and wires Fits: Adventurer 4Adventurer 4 Lite$74.95 -
LED Light Board - Adventurer 3/4, Finder 2, MP Voxel, Robo E3 | Flashforge
Flashforge
$4.99Flashforge LED Board Fits in the print head and lights the object being printed. Includes: LED Board (1 pcs) Fits:Adventurer 3Adventurer 4Finder 2Monoprice VoxelRobo E3$4.99 -
Limit Switch (Y Axis) Adventurer 3/4, MP Voxel, Robo E3 | Flashforge
Flashforge
$12.95Flashforge Build Plate Limit Switch (Y Axis Sensor) For the Y Axis Includes: Limit switch (1 pcs) Fits:Adventurer 3Adventurer 4Monoprice VoxelRobo E3 Scroll down for Adventurer 4 instruction video$12.95 -
Limit Switch (Z Axis) Adventurer 4 | Flashforge
Flashforge
$11.95Flashforge Z Axis Limit Switch Includes: Limit switch (1 pcs) Fits: Adventurer 4 Scroll down for instruction video$11.95 -
M2x6 Pan Head Screw Set | 5 Pack
PB Select™
$1.29M2x6mm Blunt Nose Screw Set Includes: Screws (5 pcs) Head: PanSize: M2Length: 6mmType: Blunt nose$1.29 -
Mainboard - Adventurer 4 Pro | Flashforge
Flashforge
$169.95Please read our returns policy regarding electronic items Flashforge Mainboard Includes: Mainboard (1 pcs) Fits: Adventurer 4 Pro$169.95 -
Mainboard - Adventurer 4 | Flashforge
Flashforge
$169.95Please read our returns policy regarding electronic items Flashforge Adventurer 4 Mainboard Includes: Mainboard (1 pcs) Fits: Adventurer 4 IMPORTANT Not for the Adventurer 4 Pro$169.95 -
Motor Drive Pulley (Gray) | Flashforge
Flashforge
$6.95Timing Belt (Motor) Drive Pulley This is the drive pulley that is used on many Flashforge 3D printers. Includes:Pulley (1pcs)Pulley disc (1 pcs)E-clip (1 pcs) Fits:Adventurer 3Adventurer 4Creator ProCreator Pro 2Creator MaxCreator Max 2Creator...$6.95