Red ApolloX ASA Filament by Formfutura

• 1.75mm, 750g
• High performance, high precision, high strength
• Great UV, heat and weather resistant properties
• Great for outdoor projects that will be exposed to sunlight
• Zero warp
• Great thermal stability
• Great adhesion to heated glass plates or Kapton tape

ApolloX Print Settings

These settings are recommended by Formfutura and are meant as a starting point to help find your optimal print settings. They should work for most 3D printers; however, you may need to experiment outside these ranges. If you find settings that work better with your printer, feel free to let us know and we will be happy to post them.

Nozzle Size: ≥ 0.15mm
Print Temp: ± 235 - 255° C
Bed Temp: ± 80 - 90° C
Print Speed: Medium
Fan Speed: 0-25%
Flow Rate: ± 100%
Retraction: Yes, 5mm (here at Partsbuilt 3D, we usually retract 2mm on our MakerGear M3)
Print Surface: GeckoTek, BuildTak, or Kapton Tape. Use Dimafix Pen, if needed
Enclosure: Recommended