ApolloX ASA - 1.75mm 50g Sample | Formfutura

Condition:
New
$5.99

Description

Formfutura's ApolloX ASA filament - 1.75mm 50g sample

  • Great UV, heat and weather resistant properties
  • Great for outdoor projects that will be exposed to sunlight

ApolloX Print Settings

These settings are recommended by Formfutura and are meant as a starting point to help find your optimal print settings. They should work for most 3D printers; however, you may need to experiment outside these ranges. If you find settings that work better with your printer, feel free to let us know and we will be happy to post them.

Nozzle Size: ≥ 0.15mm

Print Temp: ± 235 - 255° C

Bed Temp: ± 80 - 90° C

Print Speed: Medium

Fan Speed: 0-25%

Flow Rate: ± 100%

Retraction: Yes, 5mm (here at Partsbuilt 3D, we usually retract 2mm on our MakerGear M3)

Print Surface: GeckoTek, BuildTak, or Kapton Tape. Use Dimafix Pen, if needed


View AllClose