Bridge Nylon Black - 1.75mm 1kg | taulman3D

UPC:
688295584032
Condition:
New
  • Bridge Nylon Taulman3D
  • Bridge Nylon - side view
  • Bridge Nylon Filament Taulman3D
$36.00

Sold Out - Notify me when back in stock

Description

Black Bridge Nylon from Taulman3D

  • Excellent tensile strength
  • Low friction surface
  • Resistant to many chemicals (exceptions: chlorine, bromines and some petrols)
  • Similar to Taulman3D's Nylon 645
  • Great for thread tapping and machine tooling

Bridge Nylon Print Settings

These settings are provided by Taulman3D and are meant as a starting point to help find your optimal print settings. They should work for most 3D printers; however, you may need to experiment outside these ranges. If you find settings that work better with your printer, feel free to let us know and we will be happy to post them.

Nozzle Size: Any

Print Temp: 245-265c

Bed Temp: 55c

Fan: Off

Print Speed: 50mm/s

Flow Rate: 100

Retraction: 1mm/.1mm nozzle or for a .5mm nozzle = 5mm

Print Surface: Apply a coat of PVA glue stick on your GeckoTek, BuildTak, or Kapton Tape

Other: Dry filament before printing, if needed

View AllClose