Description
Cable - Stepper Motor PH to XH2.54 - 4 pin | 2 meter
Approximately 2 meter long
Nema 17 stepper motor 6-pin connector to XH2.54 4-pin connector
The default wiring for this extension cable is listed below. You may need to switch the pins around to match your setup. This is done by carefully lifting the plastic tap that holds the pin in place and gently sliding the pin out.
Controller Side Motor Side
PIN 1 —————–PIN 1
PIN 2 —————– PIN 3
PIN 3 —————– PIN 4
PIN 4 —————– PIN 6
