1.75mm 500g CarbonFil Filament by Formfutura

• Reinforced with 20% ultra-light carbon fiber 
• Twice as stiff as other PETG based filaments 
• 10% more impact resistant
• Beautiful black color

CarbonFil Filament Print Settings

These settings are recommended by Formfutura and are meant as a starting point to help find your optimal print settings. They should work for most 3D printers; however, you may need to experiment outside these ranges. If you find settings that work better with your printer, feel free to let us know and we will be happy to post them.

Nozzle Size: ≥ 0.5mm

Print Temp: ± 230 - 265° C

Bed Temp: 0 - 60° C (in our workshop, we print CarbonFil at 60°-65°)

Print Speed: High

Fan Speed: 50-100%

Flow Rate: ± 100%

Retraction: Yes, ± 6mm

Print Surface: Glass surface, PEI