CR-30 (3D Print Mill)
Type in the filter box below to narrow down the Creality CR-30 parts you are looking for.
-
Flange Screw - M3x5 mm (Phillips Head)
PB Select™
$0.69Flange Screw This screw is usually used to hold a bead thermistor in the heater block. Includes: Flange screw (1 pcs) Size: M3x5mm$0.69 -
3D Print Removal Tool - Red Handle Scraper
PB Select™
$4.993D Print Removal Tool - Scraper Includes: Scraper (1 pcs) Length: 175mmBlade width: 39mm$4.99 -
Brim Scraper (Mini Scraper) Black or Orange
PB Select™
$2.49Brim Scraper (Mini Scraper) We find this tool handy for removing the brim, and purge lines from the build plate. Includes: Brim Scraper (1 pcs)$2.49 -
Flush Cut Trimmer (Side Cutters)
PB Select™
$4.99Flush Cut Trimmers Also called side cutters. We use these trimmers for cutting filament, removing supports and cleaning up prints. Includes: Trimmers (1 pc)$4.99 -
Full Hotend Kit for CR-30 (3DPrintMill) | Creality
Creality
$72.99Creality Full Hotend Kit for 3DPrintMill (CR-30) Includes: Hotend assembly (1 pcs)Fans (3 pcs)Shell (1 pcs)Silicone sock (1 pcs) Fits: CR-30 (3DPrintMill)$72.99 -
Noga Teddy Burr - TB1000 Deburring Tool for Post Processing
NOGA
$14.98Noga Teddy Burr - TB1000 Deburring tool (3D Print Cleanup Tool) The TB1000 is a high quality deburring tool with 8 mm painted hexagonal aluminum handle and N1 blade. Great for post production of 3D prints. Blade is replaceable. The Teddy Burrs has...$14.98 -
Nozzle Coat | 4ml
PB Select™
$14.99PB Select Nozzle Coat™ Nozzle Coat is a water-based PTFE nano coating for your nozzle & heater block. Using Nozzle Coat will help reduce the amount of plastic that sticks to the exterior of your nozzle & heater block...$14.99 -
POM Wheel | Creality
Creality
$4.49X Axis Idler Wheel High hardness, wear resistant POM is CNC precision machined with no burrs or bubbles for a smooth surfaceLow noise high precision smooth roller bearingsQuieter and more wear resistant than standard rollers Includes: Roller wheel...$4.49 -
RB1000 Deburring Tool for Post Processing
PB Select™
$16.953D Print Cleanup Tool - RB1000 Deburring Tool This deburring tool is great for cleaning the brim off the long, straight edges of your 3D prints. We find it easier to use than an Exacto knife, because the blade doesn't dig into the plastic print as...$16.95 -
Synthetic Grease with SYNCOLON™ (PTFE) | 85g (3oz)
Super Lube
$9.99Super Lube® 21030 - Synthetic Grease with SYNCOLON™ (PTFE) This is a Prusa Research approved lubricant. Can be used on drive gears, Linear bearings or anywhere else you need a high quality grease. Includes: 1...$9.99