Creality CR-10 V2 Extruder Kit - with Mount | Bondtech

SKU:
BOND-CR10-K75
UPC:
7350011412433
MPN:
EXT-KIT-75
Condition:
New
  • Bondtech CR10 V2 Extruder Kit
  • Creality CR10 V2 Extruder Kit
  • CR10 V2 Extruder Upgrade Kit
  • Bondtech Creality CR10 V2 Extruder Kit
$90.00
Frequently bought together:

Description

Bondtech Extruder Upgrade Kit for Creality CR-10 V2

 

Bondtech`s Dual Drive Performance:

This kit provides a high-performance material feeding system with the ability to print faster with improved quality. The adjustable thumbscrew allows you to fine-tune the force acting on the filament. It allows for a more reliable printing with all sorts of filaments, both stiff and flexible and the DualDrive system ensures that the extruder never loses grip of the filament so grinding, slipping is a thing of the past.

 

Kit includes:

  • 1x Bondtech Mini Geared extruder;
  • 1x Mount to adjust the filament sensor box height (includes metal inserts and screws);
  • 1x PTFE tube to set between Filament Sensor box and Extruder
  • 1x Motor Gear with Set Screw;
  • 1x Thumbscrew

(This kit contains no motor, your original motor is used)

Features:

  • Supplied with the newest version of the Bondtech Mini Geared (BMG) extruder with brass motor gear, black POM main gear, and threaded push-fit
  • The Bowden tube is securely held in place by the 4mm industry standard integrated push-fit connector
  • A near 0.1mm gap between the Bondtech gears and SLS 3D printed housing avoids filament jams inside the extruder. An additional short PTFE Tube is added between the Extruder and the Filament Sensor to allow for easier filament loading and unloading.

Important Notes:

Lower Current Recommended: Due to the gearing ratio, the stepper motor can push filament with such force the Bowden tube can be extruded in case there is a clog. To avoid such damage, we recommend lowering the stepper motor Current to near half the original current. Check the Step By Step Guide that teaches users how to do it.

Stepper Current Adjustment On CR-10S

Firmware Update: The Creality3D Firmware needs to be updated in order to use this Upgrade Kit. The E-steps need to be updated to 415. Please see the installation guide on how to do it that you will find under the tab “Step By Step Guide”.

 

In your slicer it is required to adjust the Maximum Z Height to 390mm using Machine Settings.

Net weight : 87.5g
Gross weight : 143g
Package Size : 137x94x65mm
Gearing ratio : 3:1
E-steps value : 415

 

View AllClose