Creator 3
Use the filter box below to narrow down the Creator 3 parts you are looking for:
-
3D Print Removal Tool - Scraper
Flashforge
$3.99Flashforge 3D Print Removal Tool Spatula for removing 3D prints from the build surface. This is the same tool that is provided with many of the new Flashforge 3D printers. Includes: Spatula (1 pcs)$3.99 -
3D Print Removal Tool - Scraper | Artillery
Artillery
$4.993D Print Removal Tool - Scraper This is the model that comes with new Artillery printers. It can be used with any printer. Includes: Scraper (1 pcs)$4.99 -
Air Duct for Print Cooling (Left Hotend) Creator 3 | Flashforge
Flashforge
$9.95Flashforge Hotend Air Duct (Left Side) Directs air to the part being printed Includes: Left side air duct (1pcs) Fits: Creator 3 Note: Does not include mounting screws$9.95 -
Air Duct for Print Cooling (Right Hotend) Creator 3 | Flashforge
Flashforge
$9.95Flashforge Hotend Air Duct (Right Side) Directs air to the part being printed Includes: Right side air duct (1pcs) Fits: Creator 3 Note: Does not include mounting screws$9.95 -
Bed Leveling Card | Flashforge
Flashforge
$2.90Flashforge Bed Leveling Card Includes: Leveling card (1 pcs)$2.90 -
Bed Leveling Hardware Kit - Creator 3 and Guider 2/2S HT | Flashforge
Flashforge
$14.95Flashforge Bed Leveling Hardware For leveling the build plate. Includes:Spring (3 pcs)Thumb Nut (3 pcs) Fits: Creator 3Creator 3 ProGuider 2Guider 2S HT$14.95 -
Bed Leveling Springs - Creator 3/3 Pro, Guider 2/2S HT | Flashforge
Flashforge
$8.95Flashforge Bed Leveling Springs - 3 Pack Strong springs for leveling the build plate. Includes: Spring (3 pcs) Fits: Creator 3Creator 3 ProGuider 2Guider 2S HT$8.95 -
Boron Nitride Thermal Paste
PB Select™
Regular Price: $11.65 - $116.50$6.99 - $49.95Boron Nitride Thermal Paste (BN Paste) Thermal paste improves heat conduction and heat distribution in the hotend. Contains high quality ZYP™ Boron Nitride and proprietary binders which reduce cracking and flaking when dried...Regular Price: $11.65 - $116.50$6.99 - $49.95 -
Bottom Housing for Bed Leveling Sensor - Creator 3 | Flashforge
Flashforge
$3.99!! WARNING !! This is a very delicate part. When handling and installing do not press or put any pressure on the middle eyelet (see picture), this eyelet will break with even a small amount of pressure. Bottom Housing for...$3.99 -
Build Plate Base (Magnetic) - Creator 3 | Flashforge
Flashforge
$139.95Flashforge Magnetic Build Plate Base For use with Flashforge flexible build plate (not included) Includes: Magnetic build plate base (1 pcs) Fits: Creator 3$139.95 -
Build Plate Heater - Creator 3 | Flashforge
Flashforge
$99.95Flashforge Build Plate Heater Includes: Heater with wire & connector (1 pcs) Fits: Creator 3$99.95 -
Build Plate Leveling Sensor - Creator 3 | Flashforge
Flashforge
$24.95Flashforge Bed Leveling Sensor Switch Includes:Sensor switch (1 pcs)Plastic housing (1 pcs) Fits: Creator 3 (with 3 wire switch) Note: Important! This is for the later version Creator 3 which has the 3 wire switch. If your current switch has...$24.95 -
Cable for Left Side Filament Sensor - Creator 3 | Flashforge
Flashforge
$7.99Flashforge Filament Sensor Cable - Left Runs from left side filament sensor to mainboard. Includes: Cable (1 pcs) Fits: Creator 3 (Left Side)$7.99 -
Cable for Right Side Filament Sensor - Creator 3 | Flashforge
Flashforge
$7.99Flashforge Filament Sensor Cable - Right Runs from the right side filament sensor to the mainboard. Includes: Cable (1 pcs) Fits: Creator 3 (Right Side)$7.99 -
Cable for Touch Screen - Creator 3 | Flashforge
Flashforge
$9.99Flat Cable for TFT Touch Screen Connects touch screen to mainboard Includes: Cable (1 pcs) Fits: Creator 3 WARNING Pay attention to the orientation of your current cable.Plugging this cable in backwards will...$9.99 -
Cable for X Axis Motor (Left Side) - Creator 3/3 Pro | Flashforge
Flashforge
$12.95Flashforge X Motor Cable (Left Side) This cable runs from the mainboard to the X axis stepper motor that moves the left extruder Includes: Cable (1 pcs) Fits: Creator 3Creator 3 Pro$12.95 -
Cable for X Axis Motor (Right Side) - Creator 3/3 Pro | Flashforge
Flashforge
$12.95Flashforge X Motor Cable (Right Side) This cable runs from the mainboard to the X axis stepper motor that moves the right extruder Includes: Cable (1 pcs) Fits: Creator 3Creator 3 Pro$12.95 -
Cable for Y Axis Motor - Creator 3/3 Pro | Flashforge
Flashforge
$8.99Flashforge Y Motor Cable Runs from Y axis stepper motor to mainboard Includes: Cable (1 pcs) Fits: Creator 3Creator 3 Pro$8.99 -
Door Detection Sensor Board - Creator 3, Inventor 2 | Flashforge
Flashforge
$12.95Flashforge Door Detection Board Senses when door is closed Includes: Detection board (1 pcs) Fits:Creator 3Inventor 2$12.95 -
E Clip - 5 Pack | Flashforge
Flashforge
$2.99Flashforge E-Clips For holding timing pulley to 5mm motor and axle shafts Includes: E-Clip (5pcs)$2.99