Creator Max
Use the filter box below to narrow down the Creator Max parts you are looking for:
-
Stepper Driver for Creator, Inventor, Dreamer | Flashforge
Flashforge
$12.95Replacement Stepper Driver for Flashforge 3D Printers Includes:Stepper Driver (1 pcs)Heatsink (1 pcs) Fits:Creator ProCreator MaxInventorDreamerDreamer NX$12.95 -
Stepper Motor (Extruder) Creator Pro, Creator Max | Flashforge
Flashforge
$24.95Flashforge E Axis Stepper Motor Includes: Stepper motor (1 pcs) Location: Extruder Fits:Creator ProCreator Max$24.95 -
Stepper Motor (X/Y Axis) Creator Pro/Pro 2*, Creator Max/Max 2*, Dreamer/NX | Flashforge
Flashforge
$25.95Flashforge Stepper Motor - X/Y Axis Includes: Stepper Motor (1 pcs) Location: X axis or Y axis Fits:Creator ProCreator Pro 2 (*X axis only)Creator MaxCreator Max 2 (*X axis only)DreamerDreamer NX$25.95 -
Stepper Motor - Z-Axis (with Lead Screw & Nut) - Creator Pro, Creator Pro 2, Creator Max, Creator Max 2 | Flashforge
Flashforge
$69.95Flashforge Z Motor with Leadscrew & Nut Fitment Note: Some older Creator Pro printers use the Dreamer Z motor/lead screw, which is a little bit shorter. Please check that your current leadscrew matches the picture. ...$69.95 -
Synthetic Grease with PTFE - 1 cc | Super Lube™
Super Lube
$0.99Super Lube 82340 - Synthetic Grease with SYNCOLON™ (PTFE) This small size pouch is great for lubing the filament drive gears on dual gear or orbiting gear extruders. Includes: 1 Pouch Size: 1 cc Contains no...$0.99 -
Synthetic Grease with SYNCOLON™ (PTFE) | 12g
Super Lube
$5.99Super Lube 21010 - Synthetic Grease with SYNCOLON™ (PTFE) Super Lube 21010 is a Prusa Research approved lubricant. Use on your Bondtech drive gears, Linear bearings or anywhere else you need a high quality...$5.99 -
Synthetic Grease with SYNCOLON™ (PTFE) | 3oz
Super Lube
$9.99Super Lube 21030 - Synthetic Grease with SYNCOLON™ (PTFE) This is a Prusa Research approved lubricant. Can be used on drive gears, Linear bearings or anywhere else you need a high quality grease...$9.99 -
Thermocouple for Creator Max | Flashforge
Flashforge
$19.95Flashforge Thermocouple Includes: Thermocouple (1 pcs) Fits: Creator Max$19.95 -
Timing Belt - 6 MM - PowerGrip GT2 | Cut to Length
Gates
$7.99Gates GT2 6MM Belt Sold in lengths of 1 meter Belt width: 6mm The length of the belt you receive will be the quantity you order x1 meter. So, if you order a quantity of 4 you will receive one 4 meter belt.$7.99 -
Top Cover - Creator Pro/2, Creator Max/2 | Flashforge
Flashforge
$49.95Top Cover This is the large clear acrylic cover that goes on the top of the printer. Includes: Top cover (1 pcs) Fits:Creator Pro (2016 or later version)Creator Pro 2Creator MaxCreator Max 2$49.95 -
Top Cover - Creator Pro/2, Creator Max/2 | Flashforge - Used Item*
Flashforge
Regular Price: $49.95$39.95*Used Item Removed from used Creator Pro printers, top covers may be scuffed and show signs of wear, but have no cracks and are in good working condition. Top Cover This is the large clear acrylic cover that goes on the top of...Regular Price: $49.95$39.95 -
Tube Grease | Robo 3D
Robo 3D
$3.99Tube Grease for lubing the rods and ball screws of your 3D printer. This is the same grease that comes stock with Robo 3D R1+/R2 printers. Includes: Grease (1 pcs) Size: 10g$3.99 -
Unclog Pin | Flashforge
Flashforge
$3.59Hotend Unclog Pin Helps clear blockages from the hotend Diameter: 1.5mmLength: 133mm Includes: Unclog pin (1 pcs)$3.59 -
V Groove Bearing (V623ZZ) 3x12x4mm - for Extruder | Flashforge
Flashforge
$2.99Flashforge Extruder V Bearing Includes: V bearing (1 pcs) Specifications:ID: 3mmOD: 12mmW: 4mmG: 9.5mm Fits:Adventurer 3Adventurer 4Creator 3Creator 3 ProCreator ProCreator Pro 2Creator MaxCreator Max 2DreamerDreamer NXFinder 2Guider 2Guider...$2.99 -
WIFI Board - Creator Max, Inventor, Dreamer | Flashforge
Flashforge
$12.95Flashforge WIFI Board Includes: WIFI board (1 pcs) Fits:Creator MaxInventorDreamerDreamer NX$12.95 -
Wrench - 6mm - Creator Pro, Dreamer/NX, Inventor | Flashforge
Flashforge
$1.59Flashforge Wrench For the heat break on some Flashforge 3D printers Includes: Wrench (1 pcs) Size: 6mm Fits:InventorDreamerDreamer NXCreator ProCreator Max Note This is not a nozzle wrench. Nozzle wrench available here.$1.59 -
Y Axis Carriage Bracket (Left Side) Creator Pro/Max, Inventor/2, Dreamer/NX, Finder/2 | Flashforge
Flashforge
$9.95Y Axis Carriage Bracket - LEFT SIDE ONLY This is the bracket that snaps onto the Y axis linear bearings. The idler pulley and x axis rods attach to this bracket Includes: Bracket (1 pcs) Fits:Creator MaxCreator ProInventorInventor...$9.95 -
Y Axis Carriage Bracket (Right Side) Creator, Inventor, Dreamer, Finder | Flashforge
Flashforge
$9.95Y Axis Carriage Bracket - RIGHT SIDE (Motor Side) This is the bracket that snaps onto the Y axis linear bearings. The motor, limit switch and x axis rods attach to this bracket Includes: Bracket (1 pcs) Fits:Creator MaxCreator...$9.95 -
Y Rod Bracket (Right Rear Corner) Creator Pro/2, Creator Max/2 | Flashforge
Flashforge
$9.95Linear Rod and Pulley Bracket Holds Y axis rod and pulley in place. Includes: Bracket (1 pcs) Location: Right rear corner only Fits:Creator ProCreator Pro 2Creator MaxCreator Max 2 Note: Does not fit left front/rear or right front...$9.95 -
Y Rod/Pulley Bracket (3 Corners) Creator Pro/2, Creator Max/2 | Flashforge
Flashforge
$9.95Linear Rod and Pulley Bracket Holds Y axis rod in place Includes: Bracket (1 pcs) Location:Left RearLeft FrontRight Front Fits:Creator ProCreator Pro 2Creator MaxCreator Max 2 Note: Does not fit right rear corner. If you need the...$9.95