Creator Pro 2
Use the filter box below to narrow down the Creator Pro 2 parts you are looking for:
-
Pulley Assembly (Idler) X-Axis - Creator Pro 2, Creator Max 2 | Flashforge
Flashforge
Price: $12.95Flashforge Idler Pulley Assembly Includes: Idler pulley assembly (1 pcs) For: X-Axis Fits: Creator Pro 2Creator Max 2Price: $12.95 -
Pulley Assembly (Idler) Y-Axis - Creator Pro/2, Creator Max 2 | Flashforge
Flashforge
Price: $12.95Flashforge Idler (Driven) Pulley Assembly Center shaft is about 37mm long Includes: Pulley assembly (1 pcs) Location: Y-Axis Fits:Creator ProCreator Pro 2Creator Max 2Price: $12.95 -
Set Screw - M4X4 - Cup Point | 12.9 Grade
PB Select™
Price: $0.79M4X4 Set Screw Used to secure the heater cartridge and heatsink of many Flashforge 3D printers. Includes: M4x4 set screw (1 pcs) Specs:12.9 GradeCup PointUses 2mm Hex Key Driver (not included) Fits:FinderFinder 2Guider 2Guider 2S...Price: $0.79 -
Spool Holder - Creator Pro, Guider 2, Guider 2S HT | Flashforge
Flashforge
Price: $9.95Flashforge Spool Holder Includes: Spool holder (1 pcs) Fits:Creator ProCreator Pro 2Creator MaxCreator Max 2Guider 2Guider 2S HT (with rectangular opening for spool holder)Price: $9.95 -
Spring for Belt Tension | Flashforge
Flashforge
Price: $3.49Flashforge Spring Includes: Spring (1 pcs) Fits:Creator ProCreator Pro 2Creator MaxCreator Max 2DreamerDreamer NXFinder 2InventorInventor 2Price: $3.49 -
Stepper Driver (Black Ones) Creator Pro 2, Creator Max 2 | Flashforge
Flashforge
Price: $12.95Flashforge Stepper Driver (Black Version) Includes:Stepper Driver (1 pcs)Heatsink (1 pcs) Fits:Creator Pro 2Creator Max 2 WARNING Do not install these in the location of the green stepper drivers. This will damage the board...Price: $12.95 -
Stepper Driver (Green Ones) Creator Pro 2, Creator Max 2 | Flashforge
Flashforge
Price: $12.95Flashforge Stepper Driver (Green Version) Includes:Stepper Driver (1 pcs)Heatsink (1 pcs) Fits:Creator Pro 2Creator Max 2 WARNING Do not install these in the location of the black stepper drivers. This will damage the board and...Price: $12.95 -
Stepper Driver - Creator Pro 2 (XA1, XB1), Guider 2S HT (X/Y/E Axis) | Flashforge
Flashforge
Price: $13.95Replacement Stepper Driver Includes:Stepper Driver (1 pcs)Heatsink (1 pcs) Fits: Creator Pro 2 (XA1, XB1 location)Guider 2S HT (X/Y & Extruder Only - NOT for Z Axis) WARNING Do not install in Z axis location on the Guider 2S...Price: $13.95 -
Stepper Motor (Extruder) Dreamer, Inventor, Creator Pro 2, Creator Max 2 | Flashforge
Flashforge
Price: $24.95Flashforge Extruder Stepper Motor Includes: Stepper motor (1 pcs) Fits:InventorDreamerDreamer NXCreator Pro 2Creator Max 2Price: $24.95 -
Stepper Motor (X/Y Axis) Creator Pro/Pro 2, Creator Max/Max 2, Dreamer/NX | Flashforge
Flashforge
Price: $25.95Flashforge Stepper Motor - X/Y Axis Includes: Stepper Motor (1 pcs) Location: X axis or Y axis Fits:Creator ProCreator Pro 2 Creator MaxCreator Max 2 DreamerDreamer NXPrice: $25.95 -
Stepper Motor - Z-Axis (with Lead Screw & Nut) - Creator Pro, Creator Pro 2, Creator Max, Creator Max 2 | Flashforge
Flashforge
Price: $69.95Flashforge Z Motor with Leadscrew & Nut Fitment Note: Some older Creator Pro printers use the Dreamer Z motor/lead screw, which is a little bit shorter. Please check that your current leadscrew matches the picture. ...Price: $69.95 -
Synthetic Grease with PTFE - 1 cc | Super Lube™
Super Lube
Price: $0.99Super Lube 82340 - Synthetic Grease with SYNCOLON™ (PTFE) This small size pouch is great for lubing the filament drive gears on dual gear or orbiting gear extruders. Includes: 1 Pouch Size: 1 cc Contains no...Price: $0.99 -
Synthetic Grease with SYNCOLON™ (PTFE) | 12g
Super Lube
Price: $5.99Super Lube 21010 - Synthetic Grease with SYNCOLON™ (PTFE) Super Lube 21010 is a Prusa Research approved lubricant. Use on your Bondtech drive gears, Linear bearings or anywhere else you need a high quality...Price: $5.99 -
Synthetic Grease with SYNCOLON™ (PTFE) | 3oz
Super Lube
Price: $9.99Super Lube 21030 - Synthetic Grease with SYNCOLON™ (PTFE) This is a Prusa Research approved lubricant. Can be used on drive gears, Linear bearings or anywhere else you need a high quality grease...Price: $9.99 -
Thermocouple - Creator Pro 2, Creator Max 2 | Flashforge
Flashforge
Price: $19.95Flashforge Thermocouple Includes: Thermocouple (1 pcs) Fits:Creator Pro 2Creator Max 2Price: $19.95 -
Timing Belt - 6 MM - PowerGrip GT2 | Cut to Length
Gates
Price: $7.99Gates GT2 6MM Belt Sold in lengths of 1 meter Belt width: 6mm The length of the belt you receive will be the quantity you order x1 meter. So, if you order a quantity of 4 you will receive one 4 meter belt.Price: $7.99 -
Top Cover - Creator Pro/2, Creator Max/2 | Flashforge - Used Item*
Flashforge
Regular Price: $49.95Price: $39.95*Used Item Removed from used Creator Pro printers, top covers may be scuffed and show signs of wear, but have no cracks and are in good working condition. Top Cover This is the large clear acrylic cover that goes on the top of...Regular Price: $49.95Price: $39.95 -
Touch Screen - Creator Pro 2, Creator Max 2 | Flashforge
Flashforge
Price: $79.95Flashforge Touch Screen Includes: Touch Screen (1 pcs) Fits:Creator Pro 2Creator Max 2 Note: Does not come with the metal frame around the screen. If your current screen has the metal shroud, remove it by straightening the tabs on the back fo...Price: $79.95 -
Tube Grease | Robo 3D
Robo 3D
Price: $3.99Tube Grease for lubing the rods and ball screws of your 3D printer. This is the same grease that comes stock with Robo 3D R1+/R2 printers. Includes: Grease (1 pcs) Size: 10gPrice: $3.99 -
Unclog Pin | Flashforge
Flashforge
Price: $3.59Hotend Unclog Pin Helps clear blockages from the hotend Diameter: 1.5mmLength: 133mm Includes: Unclog pin (1 pcs)Price: $3.59