Crystal Flex by Formfutura - SBC (Styrene-Butadiene Co-polymer) based filament

• High performance
• High surface gloss
• Very clear, with high levels of transparency
• Semi-flexible
• Resilient and bendable up to 230% without causing white stress marks
• Practically no warping, making it easier to print
• Good first layer adhesion to heated print surfaces
• Extremely low water-absorption properties
• Shore Hardness 63D

Crystal Flex Print Settings

These settings are recommended by Formfutura and are meant as a starting point to help find your optimal print settings. They should work for most 3D printers; however, you may need to experiment outside these ranges. If you find settings that work better with your printer, feel free to let us know and we will be happy to post them.

Nozzle Size: ≥ 0.15mm

Layer Height: ≥ 0.1mm

Flow Rate: ± 100%

Print Temp: ± 230 - 260° C

Print Speed: High

Retraction: Yes, ± 5mm

Bed Temp: ± 80 - 100° C

Fan Speed: 0-25%

Print Surface: GeckoTek, BuildTak, Kapton Tape. Use DimaFix Pen, if needed.