E3D Revo CR & Parts

E3D Revo CR & Parts

  • Spatula for 3D printing

    3D Print Removal Tool - Scraper

    Flashforge

    $3.99
      Flashforge 3D Print Removal Tool Spatula for removing 3D prints from the build surface. This is the same tool that is provided with many of the new Flashforge 3D printers.  Includes: Spatula (1 pcs)
    $3.99
  • 3D Print Cleanup Tool

    Edge Cleanup (Deburring) Tool for 3D Prints

    NOGA

    $12.95
    3D Print Cleanup Tool This deburring tool is great for cleaning the brim off the long, straight edges of your 3D prints. We find it easier to use than an Exacto knife, because the blade doesn't dig into the plastic print as easily. The swivel head makes...
    $12.95
  • Nozzle Coat™ for 3D Printing

    Nozzle Coat | 4ml

    PB Select™

    $14.99
    Nozzle Coat™  Nozzle Coat is a water-based PTFE nano coating for your nozzle & heater block. Using Nozzle Coat will help reduce the amount of plastic that sticks to the exterior of your nozzle & heater block. Includes:...
    $14.99
  • Revo CR Heater

    Revo CR Heater Core for Creality | E3D

    E3D

    $36.99
    Revo™ CR HeaterCore for Creality - 24 volt This is a special Revo HeaterCore intended for use with the Revo CR. It uses a 40W heater and a 100K NTC thermistor, which has the same response as a stock Creality thermistor, saving you the...
    $36.99
  • Revo CR

    Revo CR with Fully Loaded Nozzle Kit - 12 Volt | E3D

    E3D

    $134.95
    Revo™ CR - with Fully Loaded Nozzle Kit Voltage: 12 volt  Nozzle Sizes: 0.25, 0.40, 0.60 and 0.80mm  (one of each size) Revo CR is a drop-in upgrade for some of the most popular Creality 3D printers available,...
    $134.95
  • Revo for CR10

    Revo CR with Fully Loaded Nozzle Kit - 24 Volt | E3D

    E3D

    $134.95
    Revo™ CR - with Fully Loaded Nozzle Kit Voltage: 24 volt  Nozzle Sizes: 0.25, 0.40, 0.60 and 0.80mm (one of each size)  Revo CR is a drop-in upgrade for some of the most popular Creality 3D printers available, including the...
    $134.95
  • Silicone Sock-X (Black) for Revo Nozzle | 4 Pack

    Silicone Sock-X (Black) for Revo Nozzle | 4 Pack

    Levendigs

    $6.99
    Sock-X for E3D Revo Nozzle Nozzle not included This premium silicone sock uses a small air gap to lower the convection heat from the nozzle and can handle printing temps of up to 300c. Designed specifically for the E3D Revo Nozzle...
    $6.99
  • Sock-X for Revo Nozzle - Blue

    Silicone Sock-X (Blue) for Revo Nozzle | 4 Pack

    Levendigs

    $6.99
    Sock-X for E3D Revo Nozzles Nozzle not included This premium silicone sock uses a small air gap to lower the convection heat from the nozzle and can handle printing temps of up to 300c. The primary purpose of a silicone sock is to help...
    $6.99
  • Sock-X for Revo Nozzle - Green

    Silicone Sock-X (Green) for Revo Nozzle | 4 Pack

    Levendigs

    $6.99
    Sock-X for E3D Revo Nozzles Nozzle not included This premium silicone sock uses a small air gap to lower the convection heat from the nozzle and can handle printing temps of up to 300c.  The primary purpose of a silicone sock is to...
    $6.99
  • Silicone Sock-X (Orange) for Revo Nozzle | 4 Pack

    Silicone Sock-X (Orange) for Revo Nozzle | 4 Pack

    Levendigs

    $6.99
    Sock-X for E3D Revo Nozzles Nozzle not included This premium silicone sock uses a small air gap to lower the convection heat from the nozzle and can handle printing temps of up to 300c.  The primary purpose of a silicone sock is to...
    $6.99
  • Sock-X for Revo Nozzle - Red

    Silicone Sock-X (Red) for Revo Nozzle | 4 Pack

    Levendigs

    $6.99
    Sock-X for E3D Revo Nozzles Nozzle not included This premium silicone sock uses a small air gap to lower the convection heat from the nozzle and can handle printing temps of up to 300c.  The primary purpose of a silicone sock is to...
    $6.99
  • Sock-X for Revo Nozzle - Yellow

    Silicone Sock-X (Yellow) for Revo Nozzle | 4 Pack

    Levendigs

    $6.99
    Sock-X for E3D Revo Nozzles Nozzle not included This premium silicone sock uses a small air gap to lower the convection heat from the nozzle and can handle printing temps of up to 300c. The primary purpose of a silicone sock is to help...
    $6.99
  • Silicone Sock-X installed on Revo Nozzle

    Silicone Sock-X for Revo Nozzle | Mix Pack

    Levendigs

    $6.99
    Sock-X for E3D Revo Nozzles Nozzles not included This premium silicone sock uses a small air gap to lower the convection heat from the nozzle and can handle printing temps of up to 300c. Designed specifically for the E3D Revo Nozzle. These...
    $6.99
  • 1cc Super Lube

    Synthetic Grease with PTFE - 1 cc | Super Lube™

    Super Lube

    $0.99
      Super Lube 82340 - Synthetic Grease with SYNCOLON™ (PTFE)  This small size pouch is great for lubing the filament drive gears on dual gear or orbiting gear extruders. Includes: 1 Pouch Size: 1 cc Contains no...
    $0.99
  • Synthetic Grease with SYNCOLON™ (PTFE)

    Synthetic Grease with SYNCOLON™ (PTFE) | 12g

    Super Lube

    $5.99
      Super Lube 21010 - Synthetic Grease with SYNCOLON™ (PTFE)  Super Lube 21010 is a Prusa Research approved lubricant.   Use on your Bondtech drive gears, Linear bearings or anywhere else you need a high quality...
    $5.99
  • Synthetic Grease with SYNCOLON™ (PTFE) | 3oz

    Synthetic Grease with SYNCOLON™ (PTFE) | 3oz

    Super Lube

    $9.99
      Super Lube 21030 - Synthetic Grease with SYNCOLON™ (PTFE)  This is a Prusa Research approved lubricant.   Can be used on drive gears, Linear bearings or anywhere else you need a high quality grease...
    $9.99