EasyCork Dark - Formfutura's PLA composite filament with approximately 30% cork fiber

• Lightweight
• Beautiful, cork-like appearance and feel
• Warp-free
• Easy to print on almost any FFF 3D printer

EasyCork Filament Print Settings

These settings are recommended by Formfutura and are meant as a starting point to help find your optimal print settings. They should work for most 3D printers; however, you may need to experiment outside these ranges. If you find settings that work better with your printer, feel free to let us know and we will be happy to post them.

Nozzle Size: ≥0.4mm

Print Temp: ± 210 - 260°C

Bed Temp: ± 0 - 60° C

Print Speed: High

Fan Speed: 50-100%

Flow Rate: ± 100%

Retraction: ± 5mm

Print Surface: GeckoTek, BuildTak, Kapton Tape.