Ender 5 Plus

Limit Switch (Endstop) Includes: Limit Switch (1 pcs)  Fits:Ender-3Ender-3 V2Ender-3SEnder-3 ProEnder-3 MaxEnder-5Ender-5 PlusCR-10CR-10 V3CR-10 S4

  Main Body for Micro Swiss Direct Drive Extruder configured for ExoSlide System Fits: Printers with ExoSlide System Includes:1x Main Extruder body2x M4 x .7 x 16mm ExoSlide mounting screws CNC Machined and Assembled in USA

Main Body for Micro Swiss Direct Drive Extruder on Linear Rail System Fits:Printers with MGN12 Linear Rail with MGN12H Carriage BlockOnly for printers with bottom belt mounting position Includes:1x Main Extruder body1x Linear Rail mounting...

MK8 M2 Hardened High Speed Steel Nozzle  Size: Select Above Includes: Nozzle (1 pcs) The M2 nozzles are designed for high temperatures, abrasion resistance and with superior non-stick properties. Nozzles are machined from M2 high...

  Micro Swiss MK8 Wear Resistant Brass Nozzle  Size: Select Above Includes: MK8 nozzle (1 pcs) - Made from a 360 brass base material and plated with TwinClad XT coating, a nickel composite coating designed for very low friction.-...

PB Select™ MK8 Brass Nozzle Precision ground brass nozzle gives a smooth consistent print. Size: Select Above Includes: MK8 nozzle (1 pcs) Fits:Alfawise U20Alfawise U30Anet A8Anet A8 PlusAnet ET4Anet ET5XBQ Prusa I3 HephestosBQ...

MK8 Apollo Series Nozzle - Alloy 7075 Aluminum - 0.30mm Size:  0.30mm  Includes: MK8 nozzle (1 pcs) - For 1.75mm diameter filament- Made from the toughest alloy 7075 aircraft aluminum, the Apollo Series nozzles are step up...

Motor Gear for Direct Drive Extruder Spare motor gear for Micro Swiss Direct Drive kit for CR-10 & Ender printers.  Precision CNC machined teeth Hardened tool steel Includes:Gear (1 pcs)Set screw (1 pcs)Hex wrench (1 pcs)

Nozzle Coat™  Nozzle Coat is a water-based PTFE nano coating for your nozzle & heater block. Using Nozzle Coat will help reduce the amount of plastic that sticks to the exterior of your nozzle & heater block. Includes:...

X Axis Idler Wheel High hardness, wear resistant POM is CNC precision machined with no burrs or bubbles for a smooth surfaceLow noise high precision smooth roller bearingsQuieter and more wear resistant than standard rollers Includes: Roller wheel...

  PTFE liners for Micro Swiss Direct Drive Kits and All Metal Hotend (Pack of 5) Capricorn PTFE liners for Micro Swiss Direct Drive Kits and All Metal Hotend for CR10 and Ender printers. Runs between the extruder and hotend. Includes: PTFE tube...

  PTFE liner for Micro Swiss Direct Drive Kits and All Metal Hotend Capricorn PTFE liner for Micro Swiss Direct Drive Kits and All Metal Hotend for CR10 and Ender printers. Includes: PTFE tube (1 pcs) Specifications:50mm long Beveled...

Creality Pneumatic Joint Set  Includes:Small push fit connector (1 pcs)Small clip (1 pcs)Large push fit connector (1pcs)Large clip (1 pcs) Fits:Ender-2Ender-2 ProEnder-3Ender-3SEnder-3 ProEnder-3 V2Ender-3 MaxEnder-4Ender-5Ender-5...

Creality Silicone Pro Sock The primary purpose of a silicone sock is to help keep your hotend at a more consistent temperature, reducing the amount of times your heater needs to cycle. As an added benefit, the silicone sock will keep filament from...

Sock-X for E3D Revo Nozzle Nozzle not included This premium silicone sock uses a small air gap to lower the convection heat from the nozzle and can handle printing temps of up to 300c. Designed specifically for the E3D Revo Nozzle...

Sock-X for E3D Revo Nozzles Nozzle not included This premium silicone sock uses a small air gap to lower the convection heat from the nozzle and can handle printing temps of up to 300c. The primary purpose of a silicone sock is to help...

Sock-X for E3D Revo Nozzles Nozzle not included This premium silicone sock uses a small air gap to lower the convection heat from the nozzle and can handle printing temps of up to 300c.  The primary purpose of a silicone sock is to...

Sock-X for E3D Revo Nozzles Nozzle not included This premium silicone sock uses a small air gap to lower the convection heat from the nozzle and can handle printing temps of up to 300c.  The primary purpose of a silicone sock is to...

Sock-X for E3D Revo Nozzles Nozzle not included This premium silicone sock uses a small air gap to lower the convection heat from the nozzle and can handle printing temps of up to 300c.  The primary purpose of a silicone sock is to...

Sock-X for E3D Revo Nozzles Nozzle not included This premium silicone sock uses a small air gap to lower the convection heat from the nozzle and can handle printing temps of up to 300c. The primary purpose of a silicone sock is to help...