Ender 3
Use the filter box below to narrow down the Creality Ender 3 parts you are looking for:
-
PEI BuildTak Sheet - 2 pack (9.25x9.25") 235x235mm
BuildTak
$35.95BuildTak PEI Sheets Size: 235x235mm (9.25x9.25 inches) Includes: PEI Sheet (2 pcs) Fits:Creality Ender 3 seriesAny 3D printer with a 9.28x9.25 inch print bed Manufactured right here in the USA to ensure consistent quality and composition,...$35.95 -
POM Wheel | Creality
Creality
$3.99X Axis Idler Wheel High hardness, wear resistant POM is CNC precision machined with no burrs or bubbles for a smooth surfaceLow noise high precision smooth roller bearingsQuieter and more wear resistant than standard rollers Includes: Roller wheel...$3.99 -
PTFE Tube for Direct Drive & All Metal Hotend (5 Pack) | Micro Swiss
Capricorn
$4.50PTFE liners for Micro Swiss Direct Drive Kits and All Metal Hotend (Pack of 5) Capricorn PTFE liners for Micro Swiss Direct Drive Kits and All Metal Hotend for CR10 and Ender printers. Runs between the extruder and hotend. Includes: PTFE tube...$4.50 -
PTFE Tube for Micro Swiss Direct Drive Extruder | Capricorn
Capricorn
$1.99PTFE liner for Micro Swiss Direct Drive Kits and All Metal Hotend Capricorn PTFE liner for Micro Swiss Direct Drive Kits and All Metal Hotend for CR10 and Ender printers. Includes: PTFE tube (1 pcs) Specifications:50mm long Beveled...$1.99 -
Push Fit Connector Set (Pneumatic Joint) | Creality
Creality
$5.99Creality Pneumatic Joint Set Includes:Small push fit connector (1 pcs)Small clip (1 pcs)Large push fit connector (1pcs)Large clip (1 pcs) Fits:Ender-2Ender-2 ProEnder-3Ender-3SEnder-3 ProEnder-3 V2Ender-3 MaxEnder-4Ender-5Ender-5...$5.99 -
Silicone Sock - Heater Block Insulation | Creality
Creality
$3.95Creality Silicone Pro Sock The primary purpose of a silicone sock is to help keep your hotend at a more consistent temperature, reducing the amount of times your heater needs to cycle. As an added benefit, the silicone sock will keep filament from...$3.95 -
Silicone Sock-X (Black) for Revo Nozzle | 4 Pack
Levendigs
$6.99Sock-X for E3D Revo Nozzle Nozzle not included This premium silicone sock uses a small air gap to lower the convection heat from the nozzle and can handle printing temps of up to 300c. Designed specifically for the E3D Revo Nozzle...$6.99 -
Silicone Sock-X (Blue) for Revo Nozzle | 4 Pack
Levendigs
$6.99Sock-X for E3D Revo Nozzles Nozzle not included This premium silicone sock uses a small air gap to lower the convection heat from the nozzle and can handle printing temps of up to 300c. The primary purpose of a silicone sock is to help...$6.99 -
Silicone Sock-X (Green) for Revo Nozzle | 4 Pack
Levendigs
$6.99Sock-X for E3D Revo Nozzles Nozzle not included This premium silicone sock uses a small air gap to lower the convection heat from the nozzle and can handle printing temps of up to 300c. The primary purpose of a silicone sock is to...$6.99 -
Silicone Sock-X (Orange) for Revo Nozzle | 4 Pack
Levendigs
$6.99Sock-X for E3D Revo Nozzles Nozzle not included This premium silicone sock uses a small air gap to lower the convection heat from the nozzle and can handle printing temps of up to 300c. The primary purpose of a silicone sock is to...$6.99 -
Silicone Sock-X (Red) for Revo Nozzle | 4 Pack
Levendigs
$6.99Sock-X for E3D Revo Nozzles Nozzle not included This premium silicone sock uses a small air gap to lower the convection heat from the nozzle and can handle printing temps of up to 300c. The primary purpose of a silicone sock is to...$6.99 -
Silicone Sock-X (Yellow) for Revo Nozzle | 4 Pack
Levendigs
$6.99Sock-X for E3D Revo Nozzles Nozzle not included This premium silicone sock uses a small air gap to lower the convection heat from the nozzle and can handle printing temps of up to 300c. The primary purpose of a silicone sock is to help...$6.99 -
Silicone Sock-X for Revo Nozzle | Mix Pack
Levendigs
$6.99Sock-X for E3D Revo Nozzles Nozzles not included This premium silicone sock uses a small air gap to lower the convection heat from the nozzle and can handle printing temps of up to 300c. Designed specifically for the E3D Revo Nozzle. These...$6.99 -
Silicone Socks for MK7/MK8/MK9 | 3 Pack
PB Select™
$7.99PB Select™ Silicone Socks - 3 Pack The primary purpose of a silicone sock is to help keep your hotend at a more consistent temperature, reducing the amount of times your heater needs to cycle. As an added benefit, the silicone sock will keep...$7.99 -
Tension Hardware Kit for Direct Drive Extruder | Micro Swiss
Micro Swiss
$4.50Tension hardware kit for Direct Drive Extruder This is a spare tension hardware kit for Micro Swiss Direct Drive kit for CR-10 / Ender printers. Includes:Tension Pin (1 pcs)Spring (1 pcs)Tension Knob (1 pcs) Fits: Micro Swiss...$4.50 -
Tension Lever for Direct Drive Extruder | Micro Swiss
Micro Swiss
$12.75Tension lever for Micro Swiss Direct Drive Extruder This is a spare tension lever for Micro Swiss Direct Drive kit for CR-10 / Ender printers. Includes:Lever (1 pcs)Gear (1 pcs)Shoulder bolt (1 pcs)$12.75 -
Thermistor for Heated Bed - Ender 3/3S, Ender 3 Pro | Creality
Creality
$5.99Bed Thermistor for Creality Heated Bed Includes: Bed Thermistor (1 pcs) Fits: Ender 3 Ender 3S Ender 3 Pro$5.99 -
Thermistor for Hotend - Ender 3/3S, Ender 3 Pro | Creality
Creality
$5.99Creality Hotend Thermistor Includes: Hotend Thermistor (1 pcs) Fits: Ender 3 Ender 3S Ender 3 Pro$5.99 -
Thermistor for Hotend and/or Heated Bed (See Compatibility in Description) | Creality
Creality
$3.99Creality Thermistor Thermistor has bare wire ends (no installed connector) and comes with heat shrink solder butt connectors. See this video for using the heat shrink solder connectors. Includes: Thermistor (1 pcs)Heat shrink solder butt...$3.99 -
Titanium Heat Break for All Metal Hotend Kit for CR-10 / Ender Printers | Micro Swiss
Micro Swiss
$16.00Thermal Heat Break for Micro Swiss All Metal Hotend Kit Replacement heat break for Micro-Swiss All Metal Hotend Kit Made from Grade 5 Titanium Includes: Heat break (1 pcs) FitsMicro Swiss hotend for CR-10 / Ender KitMicro Swiss...$16.00