Entwined Hemp - 1.75mm 500g | 3D-Fuel
Entwined v2 – Hemp Filament by 3D-Fuel
Now updated with a new, improved formulation! 3D-Fuel has reduced the particle size of the hemp material and increased the percentage. This will enable printing in a much wider variety of 3D printers, PLUS you can now anneal it after printing for increased heat resistance!
- Entwined is 3D printing filament produced from USA-grown and processed industrial hemp
- Industrial hemp crops require no herbicides, no pesticides and grow more densely compared to corn
- Entwined hemp filament uses no dyes, allowing it to maintain a true natural brown
- There’s a large amount of visible bio-fill, something you don’t get with standard PLA
Entwined Hemp Filament Print Settings
Entwined hemp filament can be printed on any machine capable of printing with PLA using standard PLA settings.
Entwined prints well at 180-210c.
In general, a good starting point is 10 degrees cooler than you typically print PLA.
A heated bed is not necessary, though if you have one, set it to 45c.