Facilan™ C8 Filament

Diameter: 2.85mm

Weight: 750g

Facilan™ C8 is an Additive Manufacturing Filament Designed for Manufacturing using 3D Printing. 

• Higher tensile  strength than ABS
• Higher impact strength than PLA.
• On most printers, Facilan™ C8 should 3D Print without visible layers. 
• Best layer adhesion properties of any 3D printing material.
• Facilan™ C8 has the best surface quality of any FDM material. 
• Great soft touch feel.
• Smooth with an even matte surface finish.
• Developed for high throughput manufacturing applications.
• Consumer-friendly parts for true Additive Manufacturing.
• This material has been designed to be used in manufacturing applications. With better interlayer bonding, smoother surfaces as well as higher strength, Facilan™ C8 is a true Additive Manufacturing material made for demanding end-use part applications.

Facilan™ C8 Material Properties

• Density 1.4 g/cm³
• Tensile Strength 45 MPa
• Elongation at yield 4%
• Tensile Modulus 3000 MPa 
• Flexural Strength  67 MPa 
• Flexural Modulus 3640 MPa
• Izod impact strength (notched) 7 kJ/m2 
• Shore D Hardness  72
• Heat Deflection Temperature 55°C

Print Settings 

• Bed Temperature: Cold or 35°C
• Adhesion: Use PEI sheets. The material may adhere too well on glass when compared to other materials so use caution when removing parts. 
• Print Temperature: 195 °C (180-210 °C).
• Print Speed: 30 mm/s for the outer layer, 45 mm/s inner layer, 50 mm/s infill speed. 

TDS

You can find the Technical Data Sheet for Facilan™ C8 here.

MSDS

The Material Safety Data Sheets for Facilan™ C8 is available for download here.