Fans, Heatsinks, Etc

12V Dual Ball Bearing 25mm Fan for Slice Mosquito Hotend 12 volt 3.64 CFM Molex connector 2 bolts included - mount directly to your Slice Mosquito or Mosquito Magnum hotend

PB Select™ Metal Fan Guard Includes: Fan guard (1 pcs) Fits: 40x40mm fans Note: Mounting screws not included

  Dual Ball Bearing Blower Fan Cools the part being printed. Also known as the part cooling or print cooling fan. Includes: Blower fan (1 pcs) Specifications:Dual ball bearing 5 volts5000 RPM4.5 CFMConnector: Prusa compatibleBrand: LDO...

Bowden Collet with Clip Replacement Collet for our RepRap V6 Heatsinks Suitable for 4mm OD Bowden tube Fits:  PB Select™ V6 Heatsink Orbiter Extruder V2.0 Includes: Push fit collet (1 pc) Collet clip (1 pc) Does not fit E3D heatsink.  

24 Volt Fan for Revo™ Six Includes: 24 volt fan (1 pcs)Clear fan mount (1 pcs) Voltage: 24 voltsSize: 30x10mm

60x60x15 mm Fan Dual Ball Bearing 2 wires 8 inch leads 0.13amp  

  E3D Dual Ball Bearing Fan - 30mm 12v These fans have the E3D seal of approval. Use for E3D HotEnds, Extruders or anywhere else you need a good quality ball bearing fan. Include: Fan (1 pcs) Specs:Size: 30x30x10mmVoltage: 12 VDCAmps: 0.10Wire...

E3D Hotend Fan - Ball Bearing - 30mm 24v These fans have the E3D seal of approval. Use for E3D HotEnds, Extruders or anywhere else you need a good quality ball bearing fan. Includes: Fan (1 pcs) Size: 30x30x10mmVoltage: 24 VDCLeads: 1mConnector: 2...

  E3D Dual Ball Bearing Fan - 40mm 12v These fans have the E3D seal of approval. Use on the E3D Titan Aero or anywhere else you need a good quality ball bearing fan. Includes: Fan (1 pcs)Extension cable (1...

  E3D Dual Ball Bearing Fan - 40mm 24v These fans have the E3D seal of approval. Use on the E3D Titan Aero or anywhere else you need a good quality ball bearing fan. Includes: Fan (1...

40x10 MagLev Fan by Sunon™  For cooling the hotend heatsink. A high quality long life fan. This fan is not quite as quiet as the Noctua fan, but provides almost twice the airflow. Note: This is ONLY a direct fit replacement for the...

RepRap Heatsink Fan Mount

RepRap Heatsink Fan Mount Color: Clear

RepRap Heatsink Fan Mount Color: Red

PB Select™ Heatsink Includes: Heatsink (1 pcs) Fits:Creator ProCreator MaxDreamerDreamer NXInventor

PB Select™ Black Heatsink for Nema17 Stepper Motor Heatsink in black anodized aluminum to remove heat from desired component.Equipped with self-adhesive on the back for easy attachment. Includes: Heatsink (1 pcs) Size: 40x40x10 mm

Aluminum Heatsink These are generally used on 2208/2209 stepper drivers.  Size: 15x14.5x13 Color: Blue Self Adhesive: Yes Includes: Heatsink (1 pcs)

Aluminum Heatsink Size: 9x9x12 Color: Black Adhesive back: Yes 5 Pack

Heatsink for Stepper Drivers Aluminum heatsink to remove heat from desired component.Self-adhesive on the back for easy attachment. Includes: Heatsink (5 pcs) Dimensions: 8.8 x 8.8 x 5 mm (+/- .15mm)

4mm Push Fit Collet (Collar) High quality replacement push fit collet with metal teeth.  Includes: Collet (1 pcs)  Fits: Bondtech ExtrudersE3D V6 HotendE3D Revo SixE3D Revo MicroE3D Revo CRPrusa i3 series Only fits: 4 mm PTFE Tube...