Addigy F2060 HT TPC Filament 

Diameter: 1.75mm
Weight: 500g
Color: Black

F2060 HT is a high performance TPC FFF material combining flexibility with prolonged high temperature use, as well as chemical resistance and strength.

This combination makes it suitable to print cold charge air ducts for demanding automotive under-the-hood applications, as well as components for end-of-arm tooling. Parts printed can resist sustained high-temperature of 175°C (1000 hrs) or 190°C (500 hrs) and chemicals such as EGR condensate. 

Possible applications
Air-fuel management systems, engine shields for automotive 
Gaskets and seals for automotive
Aluminum & rubber replacement for light weighting applications in automotive under the hood
Gaskets and seals for automotive
Tubes for home appliances

Key Benefits & Properties
A unique balance of flexibility, sustained high temperature and chemical resistance 
Prolonged high temperature performance: 175°C (1000 hrs), 190°C (500 hrs)
Excellent chemical resistance against EGR condensates
Hardness of Shore D 61 

F2060 HT Print Settings

These settings are recommended by Formfutura and are meant as a starting point to help find your optimal print settings. They should work for most 3D printers; however, you may need to experiment outside these ranges. If you find settings that work better with your printer, feel free to let us know and we will be happy to post them.

Nozzle Size: ≥ 0.25mm
Layer Height: > 0.1mm *First layer : 100 - 150% of first layer thickness.
Flow Rate: ± 100%
Print Temp: ± 220 - 245°C 
Print Speed:Low / Medium *First layer : 100 - 150% of first layer thickness.
Retraction: No
Bed Temp: ± 80 - 120°C *Do only remove printed object from print bed when print bed has cooled down to ambient temperatures, as otherwise printed part can deform severely.
Fan Speed: 0%
Print Surface: PEI sheet
Enclosed Printer Needed: Preferred
Heated Build Chamber: Preferred 
Experience Level: Expert