MetalFil | Composite

(No reviews yet) Write a Review
Calculated at Checkout
  • Formfutura MetalFil Classic Copper
  • MetalFil Formfutura Ancient Bronze
  • MetalFil examples, treated for patina effects
MSRP: $64.95
— You save $15.00


MetalFil by FormFutura - PLA-based filament with approx. 80% metal filling

  • Can be printed on PEEK, PFTE and full metal hot ends (such as the MakerGear V4 hot end)
  • Can be printed with Bowden-style or direct drive extruders
  • Can be treated after printing to obtain the desired patina effect
  • Available in Classic Copper and Ancient Bronze

Not ready for 750g? Try a 50g sample

Formfutura MetalFil Print Settings

These settings are recommended by Formfutura and are meant as a starting point to help find your optimal print settings. They should work for most 3D printers; however, you may need to experiment outside these ranges. If you find settings that work better with your printer, feel free to let us know and we will be happy to post them.

Nozzle Size: >0.40mm

Print Temp: ± 190 - 220° C

Bed Temp: ± 0-60° C

Fan Speed: 50-100%

Print Speed: Medium

Flow Rate: ± 104%

Retraction: Yes, ± 5mm

Print Surface: GeckoTek, BuildTak, Kapton Tape

View AllClose