StoneFil by Formfutura - PLA composite stone filament composed of 50% powdered stone
Variety of beautiful stone colors: Granite, Terra Cotta, Concrete, Pottery Clay
Matte, stone-like finish
Each individual print will have a unique, natural stone coloring
50% stone filing results in filament that is ±37% heavier than average PLA filament
1.75mm filament in 500g spools. Or try a 50g sample first.
StoneFil Print Settings
These settings are recommended by Formfutura and are meant as a starting point to help find your optimal print settings. They should work for most 3D printers; however, you may need to experiment outside these ranges. If you find settings that work better with your printer, feel free to let us know and we will be happy to post them.
Experience Level: Intermediate
Nozzle Size: ≥ 0.4mm
Layer Height: Stonefil really adheres to the bed and can be difficult to remove. Increase 1st layer height and/or use blue painter's tape to avoid this.
Print Temp: ±200 - 240° C
Bed Temp: ±0 - 60° C
Print Speed: High / Medium
Fan Speed: 50-100%
Flow Rate: ±110%
Retraction: Yes - 5mm
Print Surface: GeckoTek, BuildTak, Kapton Tape.
Be the first to review this product.