Hemera Direct Kit (1.75mm) 12 Volt | E3D
E3D Hemera Direct Kit (1.75mm) 24 volt
Compatible only with 1.75mm Filament
This kit contains:
- 1 x 12V or 24V 30W Heater cartridge
- 1 x Thermistor cartridge
- 1 x Molex cable
- 1 x 40 x 40 x 10 mm 12V OR 24V Fan
- 1 x Cable tie
- 1 x E3D Hemera sink
- 1 x Idler
- 1 x Idler slide block
- 1 x Idler spring block
- 1 x Thumbwheel
- 1 x Idler shaft
- 1 x Drive hobb
- 1 x Idler hobb
- 1 x V6 Heater Block
- 1 x E3D Hemera motor
- 1 x Motor cable
- 1 x E3D Hemera fixings kit
- 1 x V6 fixings kit
- 1 x E3D Hemera heatbreak
- 1 x Brass 1.75mm, 0.4mm nozzle
- 1 x V6 sock
- 1 x Thermal compound
For E3D Hemera, we opted for a hardened stainless steel dual-drive arrangement which provides a huge boost in grip over single drive systems, in fact, we’re able to push filament with up to 10kg of force. The secondary gear shaft is on a moveable, sprung idler which allows the user to adjust filament tension.
Compact, Integrated System
Hemera is a system of components designed to work seamlessly together as a single compact product. It has a custom motor which is based on a NEMA17, along with our own faceplate designs which has allowed us to add our own features for user convenience, such as mounting slots as well as produce a very compact system.
Filament Constraint Like No Other
E3D Hemera - formerly Hermes - is the best extrusion system we’ve ever made. It combines our market-leading V6 HotEnd with an all-new filament drive to form a highly responsive direct drive extrusion system - providing unrivalled performance with flexible filaments.
Hemera constrains filament like no other extrusion system, fact. You won’t experience the full extent of its unrivalled filament constraint until you print ultra-flexible materials. This exceptional filament constraint also has a significant impact on printing rigid, and semi-rigid materials such as PLA or Nylon.
Hemera features convenient T-Slots for easy mounting to your printer, plus space for other accessories, part cooling fans and bed levelling probes to name a couple.
A Never-Before-Seen Heatsink
Hemera’ heatsink design ensures airflow is diverted up and away from both the HotEnd and the heated bed, reducing the risk of warping and uneven stresses forming in the printed part.
All interaction with Hemera is from the top. To set filament tension the user simply twists a thumbscrew and a cam slider mechanism with a captive nut compresses a spring and loads the idler. Filament tension is increased by rotating clockwise and decreased by rotating counterclockwise. Simple.
Should you need to disassemble Hemera for maintenance, the internal mechanisms are easily accessible by removing the fan, and undoing the two faceplate screws. Full access is available to clean and replace parts even while filament is loaded. When you pop off the faceplate the filament, idler and spring all come along too, as one neat assembly.
Check out the E3D blog for all the gory details!
- Data Sheet
- Assembly Guide
- Firmware Guide
- Visit the E3D Hemera product page for Printer specific upgrade guides
Find all of our documentation here: http://e3d-online.dozuki.com/