Inventor 2/S
Use the filter box below to narrow down the Inventor II parts you are looking for:
-
MK10 Brass Nozzle (Only Compatible with Micro Swiss All Metal Hotend)
PB Select™
Price: $7.95MK10 Brass Nozzle (for Micro Swiss All Metal Hotend Only) Note: Will not fit the stock PTFE lined hotend. This nozzle has completely different internal dimensions to work with the Micro Swiss thermal barrier tube...Price: $7.95 -
MK10 Micro Swiss Nozzle (for PTFE Lined Hotend*)
Micro Swiss
Price: $14.99MK10 Plated Wear-Resistant Nozzle for PTFE-Lined Hotend This nozzle is for PTFE lined hotends only. It has a larger diameter hole in the top, so the PTFE tube can slide into the nozzle. It will not work with all metal hotends...Price: $14.99 -
MK10 Micro Swiss Nozzle for All Metal Hotend Kit*
Micro Swiss
Price: $14.99MK10 Plated Wear-Resistant Nozzle for Micro Swiss All Metal Hotend Kit If you are printing abrasive material, such as carbon fiber, stainless steel, wood-filled or any other metal filled filaments, this will greatly improve the life of your...Price: $14.99 -
MK10 Micro Swiss Nozzle for All Metal Hotend Kit* (A2 Steel)
Micro Swiss
Price: $19.00Micro Swiss MK10 Wear-Resistant (A2 Tool Steel) Nozzle for Micro Swiss All Metal Hotend Kit Perfect for printing abrasive material, such as carbon fiber, metal filled, wood-filled, glow in the dark, etc. *Note: This...Price: $19.00 -
Motor Drive Pulley (Gray) | Flashforge
Flashforge
Price: $6.95Timing Belt (Motor) Drive Pulley This is the drive pulley that is used on many Flashforge 3D printers. Includes:Pulley (1pcs)Pulley disc (1 pcs)E-clip (1 pcs) Fits:Adventurer 3Adventurer 4Creator ProCreator Pro 2Creator MaxCreator Max 2Creator...Price: $6.95 -
Motor Mount (Y Axis) Finder, Inventor 2, Creator Pro/2, Creator Max/2 | Flashforge
Flashforge
Price: $6.95Flashforge Motor Mount Includes: Motor mount (1 pcs) Location: Y Axis Motor Fits:FinderFinder 2Inventor 2Creator ProCreator Pro 2Creator MaxCreator Max 2Price: $6.95 -
Nozzle (Stock Size) 0.40mm | Flashforge
Flashforge
Now: $9.95Regular Price: $12.95Flashforge Brass Nozzle Includes: Brass nozzle (1 pcs) Orifice Size: 0.40mm Note: PTFE tube not included - use the links below to buy the proper PTFE tube for your printer Fits:Guider 2 (not for HT version) - PTFE tubeInventor...Now: $9.95Regular Price: $12.95 -
Nozzle Coat | 4ml
PB Select™
Price: $14.99Nozzle Coat™ Nozzle Coat is a water-based PTFE nano coating for your nozzle & heater block. Using Nozzle Coat will help reduce the amount of plastic that sticks to the exterior of your nozzle & heater block. Includes:...Price: $14.99 -
Power Cord - NEMA 5-15P to EIC (PC Type)
PB Select™
Price: $4.95Power Supply Cord AC power cord that runs from the power supply to a USA type wall outlet Includes: Power cord (1 pcs) Note: Power supply is not includedPrice: $4.95 -
Print Surface (Bed Tape) Inventor 2 | Flashforge
Flashforge
Price: $11.95Flashforge Bed Surface Tape Adhesive backed for easy application Includes: Print surface (1 pcs) Size: 157x167mm (can be trimmed to fit smaller beds) Fits:Inventor 2Inventor 2Price: $11.95 -
PTFE Tube for Nozzle - Finder/2, Inventor 2 | Flashforge
Flashforge
Price: $1.99Flashforge PTFE Tube for Hotend/Nozzle This is the PTFE tube that fits inside the nozzle & heat break Includes: PTFE tube (1 pcs) Fits:FinderFinder 2Inventor 2Price: $1.99 -
Pulley Assembly (Idler) X-Axis - Inventor, Dreamer, Creator Pro/Max | Flashforge
Flashforge
Price: $13.95Flashforge Idler Pulley Assembly Includes: Toothed pulley (1 pcs)Shaft (1 pcs)Spacer (1 pcs)Flange bearings (2 pcs) Location: X-Axis Fits:FinderFinder 2InventorInventor 2Inventor 2SDreamerDreamer NXCreator Pro (does not fit Creator Pro...Price: $13.95 -
Set Screw - M4X4 - Cup Point | 12.9 Grade
PB Select™
Price: $0.79M4X4 Set Screw Used to secure the heater cartridge and heatsink of many Flashforge 3D printers. Includes: M4x4 set screw (1 pcs) Specs:12.9 GradeCup PointUses 2mm Hex Key Driver (not included) Fits:FinderFinder 2Guider 2Guider 2S...Price: $0.79 -
Set Screw - M4x4 - Flat Point | 12.9 Grade
PB Select™
Now: $0.59Regular Price: $0.79M4X4 Set Screw 12.9 Grade Flat Point Uses 2mm Hex Key Driver Includes: Set screw (1 pcs)Now: $0.59Regular Price: $0.79 -
Silicone Sock - Finder/2, Inventor 2/2S, Guider 2/2S HT* | Flashforge
Flashforge
Price: $2.49Silicone Sock (Heater Block Cover) The primary purpose of a silicone sock is to help keep your hotend at a more consistent temperature, reducing the amount of times your heater needs to cycle. As an added benefit, the silicone sock will keep...Price: $2.49 -
Spool Holder - Inventor 2/S | Flashforge
Flashforge
Regular Price: $24.95Price: $19.95Flashforge Spool Holder Includes: Spool holder (1 pcs) Color: Blue Fits: Inventor 2Inventor 2S Note: Does not include filament runout sensor. See circled area in picture.Regular Price: $24.95Price: $19.95 -
Spring for Bed Leveling - Dreamer, Inventor, Creator Pro/2, Creator Max/2 | Flashforge
Flashforge
Price: $1.99Flashforge Bed Leveling Spring Includes: Spring (1 pcs) Fits:DreamerDreamer NXInventorInventor 2FinderFinder 2Creator ProCreator Pro 2Creator MaxCreator Max 2 Note: Sold in units of 1 - Three springs are required per printerPrice: $1.99 -
Spring for Bed Leveling - Finder/2, Inventor 2 | Flashforge
Flashforge
Price: $1.99Flashforge Replacement Bed leveling Spring Includes: Spring (1 pcs) Fits:FinderFinder 2 Inventor 2Inventor 2S Note: Sold in units of one - 3 are required per printerPrice: $1.99 -
Spring for Belt Tension | Flashforge
Flashforge
Price: $3.49Flashforge Spring Includes: Spring (1 pcs) Fits:Creator ProCreator Pro 2Creator MaxCreator Max 2DreamerDreamer NXFinder 2InventorInventor 2Price: $3.49 -
Stepper Motor (Extruder) Inventor 2/2S, Finder/2 | Flashforge
Flashforge
Price: $24.95Flashforge Extruder Stepper Motor Includes: Motor (1 pcs) Location: Extruder Fits:Inventor 2Inventor 2SFinderFinder 2Price: $24.95