Inventor
Use the filter box below to narrow down the Flashforge Inventor parts you are looking for:
-
PTFE Tube for Nozzle - Creator Pro, Dreamer, Inventor | Flashforge
Flashforge
$1.99Flashforge Extruder/Nozzle PTFE Tube This is the PTFE tube that fits inside the nozzle/heat break. Includes: PTFE tube (1 pcs) Fits:Creator ProCreator MaxDreamerDreamer NXInventor$1.99 -
Pulley and Bracket Set - Inventor, Dreamer | Flashforge
Flashforge
$19.95Flashforge Bracket and Idler Pulley Set These brackets hold the outer linear rods and pulleys in place. Pulleys are included as shown in the pictures. Includes: Right side bracket/pulley assembly (1 pcs)Left side bracket/pulley...$19.95 -
Pulley Assembly (Idler) X-Axis - Inventor, Dreamer, Creator Pro/Max | Flashforge
Flashforge
$13.95Flashforge Idler Pulley Assembly Includes: Toothed pulley (1 pcs)Shaft (1 pcs)Spacer (1 pcs)Flange bearings (2 pcs) Location: X-Axis Fits:FinderFinder 2InventorInventor 2Inventor 2SDreamerDreamer NXCreator Pro (does not fit Creator Pro...$13.95 -
Set Screw - M4X4 - Cup Point | 12.9 Grade
PB Select™
$0.79M4X4 Set Screw Used to secure the heater cartridge and heatsink of many Flashforge 3D printers. Includes: M4x4 set screw (1 pcs) Specs:12.9 GradeCup PointUses 2mm Hex Key Driver (not included) Fits:FinderFinder 2Guider 2Guider 2S...$0.79 -
Side Panel (White) Dreamer/NX, Inventor | Flashforge
Flashforge
$5.99Flashforge Side Vent Panel Includes: Vent Panel (1 pcs) Color: White Fits:DreamerDreamer NXInventor$5.99 -
Spacer for Extruder Fan - 4 Pack
PB Select™
$2.99Flashforge Extruder Fan Spacers These are the spacers that reside between the extruder fan and heatsink on some Flashforge 3D Printers. Includes: Spacer (4 pcs) Fits:Creator ProCreator MaxDreamerDreamer NXInventor$2.99 -
Spool Holder - Dreamer - Inventor | Flashforge
Flashforge
$4.99Flashforge Spool Holder Includes: Spool holder (1 pcs) Fits: DreamerDreamer NXInventor$4.99 -
Spring for Bed Leveling - Dreamer, Inventor, Creator Pro/2, Creator Max/2 | Flashforge
Flashforge
$1.99Flashforge Bed Leveling Spring Includes: Spring (1 pcs) Fits:DreamerDreamer NXInventorInventor 2FinderFinder 2Creator ProCreator Pro 2Creator MaxCreator Max 2 Note: Sold in units of 1 - Three springs are required per printer$1.99 -
Stepper Driver for Creator, Inventor, Dreamer | Flashforge
Flashforge
$12.95Replacement Stepper Driver for Flashforge 3D Printers Includes:Stepper Driver (1 pcs)Heatsink (1 pcs) Fits:Creator ProCreator MaxInventorDreamerDreamer NX$12.95 -
Stepper Motor (Extruder) Dreamer, Inventor, Creator Pro 2, Creator Max 2 | Flashforge
Flashforge
$24.95Flashforge Extruder Stepper Motor Includes: Stepper motor (1 pcs) Fits:InventorDreamerDreamer NXCreator Pro 2Creator Max 2$24.95 -
Stepper Motor - Z-Axis (with Lead Screw & Nut) - Dreamer, Inventor | Flashforge
Flashforge
Now: $39.95Regular Price: $69.95Flashforge Dreamer Z Motor Includes:Z Motor with lead screw (1 pcs)Lead screw nut (1 pcs) Fits:DreamerDreamer NXInventorNow: $39.95Regular Price: $69.95 -
Synthetic Grease with PTFE - 1 cc | Super Lube™
Super Lube
$0.99Super Lube 82340 - Synthetic Grease with SYNCOLON™ (PTFE) This small size pouch is great for lubing the filament drive gears on dual gear or orbiting gear extruders. Includes: 1 Pouch Size: 1 cc Contains no...$0.99 -
Synthetic Grease with SYNCOLON™ (PTFE) | 12g
Super Lube
$5.99Super Lube 21010 - Synthetic Grease with SYNCOLON™ (PTFE) Super Lube 21010 is a Prusa Research approved lubricant. Use on your Bondtech drive gears, Linear bearings or anywhere else you need a high quality...$5.99 -
Synthetic Grease with SYNCOLON™ (PTFE) | 3oz
Super Lube
$9.99Super Lube 21030 - Synthetic Grease with SYNCOLON™ (PTFE) This is a Prusa Research approved lubricant. Can be used on drive gears, Linear bearings or anywhere else you need a high quality grease...$9.99 -
Thermocouple - Dreamer, Inventor | Flashforge
Flashforge
$19.95Flashforge Thermocouple Includes: Thermocouple (1 pcs) Fits:DreamerInventor$19.95 -
Tube Grease | Robo 3D
Robo 3D
$3.99Tube Grease for lubing the rods and ball screws of your 3D printer. This is the same grease that comes stock with Robo 3D R1+/R2 printers. Includes: Grease (1 pcs) Size: 10g$3.99 -
Unclog Pin | Flashforge
Flashforge
$3.59Hotend Unclog Pin Helps clear blockages from the hotend Diameter: 1.5mmLength: 133mm Includes: Unclog pin (1 pcs)$3.59 -
V Groove Bearing (V623ZZ) 3x12x4mm - for Extruder | Flashforge
Flashforge
$2.99Flashforge Extruder V Bearing Includes: V bearing (1 pcs) Specifications:ID: 3mmOD: 12mmW: 4mmG: 9.5mm Fits:Adventurer 3Adventurer 4Creator 3Creator 3 ProCreator ProCreator Pro 2Creator MaxCreator Max 2DreamerDreamer NXFinder 2Guider 2Guider...$2.99 -
WIFI Board - Creator Max, Inventor, Dreamer | Flashforge
Flashforge
$12.95Flashforge WIFI Board Includes: WIFI board (1 pcs) Fits:Creator MaxInventorDreamerDreamer NX$12.95 -
Wrench - 6mm - Creator Pro, Dreamer/NX, Inventor | Flashforge
Flashforge
$1.59Flashforge Wrench For the heat break on some Flashforge 3D printers Includes: Wrench (1 pcs) Size: 6mm Fits:InventorDreamerDreamer NXCreator ProCreator Max Note This is not a nozzle wrench. Nozzle wrench available here.$1.59