M2

No returns on this itemAs you install a new nozzle onto a MakerGear hotend, a small amount of material is removed from the nozzle to create a custom fit. This makes the nozzle incompatible with any other barrel due to the slight variations in tolerances...

 No returns on this itemAs you install a new nozzle onto a MakerGear hotend, a small amount of material is removed from the nozzle to create a custom fit. This makes the nozzle incompatible with any other barrel due to the slight variations in...

 No returns on this itemAs you install a new nozzle onto a MakerGear hotend, a small amount of material is removed from the nozzle to create a custom fit. This makes the nozzle incompatible with any other barrel due to the slight variations in...

No returns on this itemAs you install a new nozzle onto a MakerGear hotend, a small amount of material is removed from the nozzle to create a custom fit. This makes the nozzle incompatible with any other barrel due to the slight variations in tolerances...

No returns on this itemAs you install a new nozzle onto a MakerGear hotend, a small amount of material is removed from the nozzle to create a custom fit. This makes the nozzle incompatible with any other barrel due to the slight variations in tolerances...

  Thermistor for MakerGear Printers This thermistor (temperature sensor) is suitable for both the V3b and the V4 Hot Ends.Each thermistor includes the proper Molex connector and can accurately read temperatures up to 300 °C. Includes:...

X-axis belt for MakerGear M3 (Rev.0 Only) and M2 3D Printer Genuine Gates GT Belt Includes: Belt (1 pcs) Location: X-Axis Fits: M3-SE (Rev.0 Only) - If you have an M3-SE Rev.1 click here for the proper beltM2 Note: If your belts...

X/Y Carriage (Linear Bearing) for MakerGear M2 and M3  Fits:M2M3 SEM3 ID Installation note: The carriage comes mounted on a plastic rail. Align the plastic rail with your printer's linear rail and carefully slide the carriage onto the linear rail...

Timing Belt for MakerGear M2 & M3 3D Printer Genuine Gates GT Belt Includes: Belt (1 pcs) Location: Y-Axis (Bed) Length: 702mm Fits: M3-IDM3-SEM2 Note: If your belts are worn, check your printer for alignment issues—misalignment...