M3 Independent Dual 3D Printer - Rev.1 | MakerGear

  • MakerGear M3 ID
  • MakerGear M3 Independent Dual
  • MakerGear M3-ID front


MakerGear M3-ID Rev.1

Please note: The MakerGear M3ID ships by UPS/FedEx Ground only.

In the Box

  • MakerGear M3-ID 3D Printer with Independent dual V4 Hot Ends
  • Simplify3D software license, at no additional cost
  • Power Supply with Adjustable Input Voltage (115 V or 230 V)
  • Power Cord
  • Two 1 kg Spools of PLA (black and blue)
  • 8 inch x 10 inch Borosilicate Glass print surface with applied film print surface
  • Tool Set
  • Sample print 
  • User Guide
  • 12-month limited warranty (extend your warranty by selecting one of the Extended MakerGear Warranty choices above)


New M3-IDs comes with a 12-month limited warranty.

MakerGear will replace all defective parts on M3-IDs as stipulated by warranty terms below. Replacement parts may be new or refurbished and will be shipped via FedEx Ground or USPS Priority in the US only. Exceptions – the MakerGear V4 hot-end is only covered under warranty when MakerGear filament and authentic MakerGear components are used. The twelve-month warranty does not cover machine abuse.

The 1 Year MakerGear Extended Warranty extends your MakerGear printer's basic warranty for an additional 12 months beyond its original expiration date, the 2 year Extended Warranty extends it for 24 months.

Please Note: Extended Warranty must be purchased in the same transaction as your MakerGear printer in order to be made effective.

True-leveling + Auto-Leveling

Offering exact calibration, assisted leveling, and superior adhesion along the entire build plate, 
the M3-ID Rev.1 introduces a touch probe in order to expedite, manage, and improve the bed leveling process. 
Additionally, the printer then reads the build plate's surface to generate a mesh pattern, which serves as a guide 
for small Z-axis compensation that correct unavoidable variances from complete flatness.


Every M3-ID comes with Simplify 3D

 M3-ID Specs

Build Dimensions Head 1 - 203 x 254 x 203 mm, Head 2 = 180 x 254 x 203 mm, Mimeo Mode = 100 x 254 x 203 per extruder
Build Plate Up to 130°C. Borosilicate glass build plate coated with polyimide film
Assisted Leveling Yes, True-Leveling + Auto Leveling
Filament Feed Direct (non-Bowden)
Materials 1.75 mm. ABS, ASA, HIPS, Nylon, PET-G, PET-T, PLA, polycarbonate, polypropylene, PVA, TPE, TPU, metal composites, wood composites, carbon fiber composites, and more
Nozzle Ships with 0.35 mm brass (0.25mm, 0.5mm, 0.75mm brass and 0.35mm and 0.50mm steel available)
Maximum Extruding Temperature 40 W heater and thermistor rated to 300 °C
Hot End Independent dual extruders with swappable V4 Hot Ends
Print Technology FFF (Fused Filament Fabrication)
X/Y Motion Independent axes with high precision linear rails guiding motion driven by kevlar reinforced belts
Z Motion 10mm rods guide motion driven by lead screw
Layer Resolution 0.020 - 0.350 mm (20 - 350 micron)
Print Head Travel Speed  80-450 mm/sec 
Ambient Operation Temperature 15˚C to 32˚C (59˚F to 90˚F)
Storage Temperature 0˚C to 32˚C (32˚F to 90˚F)
Operating Sound <65 dBA
Machine Weight 13.5 kg (29.5 lbs)
Machine Dimensions with Spool and Full Range of Motion Width x Depth x Height: 533 mm x 610 mm x 533 mm (21”x24"x21")
Shipping Box Dimensions 19 kg (42 lbs.) 535 mm x 535 mm x 635 mm (21" x 21" x 25”)
AC Input 100 - 120 V (4 A)/220 - 240 V (2 A), 47 - 63 Hz
Power Requirements 24 V DC @ 15 A
Power Consumption 360W max
Software A Simplify3D 4.0 software license and the latest version of OctoPrint for MakerGear are included with the M3-ID. With no proprietary software required, the MakerGear M3-ID is compatible with a wide variety of free and commercial software programs.
Connectivity Wifi, LAN, USB
View AllClose

Additional Information

3D Printer
View AllClose