Description
Please note: MakerGear printers ship by UPS/FedEx Ground only.
True-leveling + Auto-Leveling
Offering exact calibration, assisted leveling, and superior adhesion along the entire build plate,
the M3-SE Rev.1 introduces a BLTouch probe in order to expedite, manage, and improve the bed leveling process.
Additionally, the printer then reads the build plate's surface to generate a mesh pattern, which serves as a guide
for small Z-axis compensation that correct unavoidable variances from complete flatness.
Easily upgradable to independent dual print heads
The new M3SE comes ready to upgrade to an independent dual 3D printer. (Kits for this upgrade are not available yet, but will be in the future)
Your MakerGear M3-SE Rev.1 comes with:
- MakerGear M3-SE 3D Printer with V4 Hot End
- Power Supply with Adjustable Input Voltage (115 V or 230 V)
- Power Cord
- 1 kg Spool of PLA Filament
- 8 inch x 10 inch Borosilicate Glass print surface with applied film print surface
- Tool Set
- Sample print
- User Guide
- 12-month limited warranty (extend your warranty by selecting one of the Extended MakerGear Warranty choices above)
Warranty
New M3-SE's comes with a 12-month limited warranty.
MakerGear will replace all defective parts on M3-IDs as stipulated by warranty terms below. Replacement parts may be new or refurbished and will be shipped via FedEx Ground or USPS Priority in the US only. Exceptions – the MakerGear V4 hot-end is only covered under warranty when MakerGear filament and authentic MakerGear components are used. The twelve-month warranty does not cover machine abuse.
The 1 Year MakerGear Extended Warranty extends your MakerGear printer's basic warranty for an additional 12 months beyond its original expiration date, the 2 year Extended Warranty extends it for 24 months.
Please Note: Extended Warranty must be purchased in the same transaction as your MakerGear printer in order to be made effective.
M3-SE Specs
Build Dimensions |
203 x 254 x 203 mm
|
Build Plate |
Up to 130 °C.
Borosilicate glass build plate coated with polyimide film |
Assisted Leveling | Yes, True-Leveling + Auto Leveling |
Filament Feed | Direct (non-Bowden) |
Materials | 1.75 mm: ABS, ASA, HIPS, Nylon, PET-G, PET-T, PLA, polycarbonate, polypropylene, PVA, TPE, TPU, metal composites, wood composites, carbon fiber composites, and more |
Nozzle |
Ships with 0.35 mm brass
|
Maximum Extruding Temperature | 40W heater and thermistor rated to 300 °C |
Hot End | Swappable V4 Hot End |
Print Technology | FFF (Fused Filament Fabrication) |
X/Y Motion | Independent axes with high precision linear rails guiding motion driven by Kevlar reinforced belts |
Z Motion | 10 mm rods guide motion driven by lead screw |
Layer Resolution | 0.020 - 0.350 mm (20-350 micron) |
Print Head Travel Speed | 80-450 mm/sec |
Ambient Operation Temperature | 15˚C to 32˚C (59˚F to 90˚F) |
Storage Temperature | 0˚C to 32˚C (32˚F to 90˚F) |
Operating Sound | < 65 dBA |
Machine Weight | 12kg (26.5 lbs) |
Machine Dimensions with Spool and Full Range of Motion |
|
Shipping Box Dimensions |
19 kg (42 lbs.) 535mm x 535mm x 535mm
(21" x 21" x 21”) |
AC Input | 100 - 120V (4 A)/220 - 240 V (2 A), 47 - 63 Hz |
Power Requirements | 24V DC @ 15 A |
Power Consumption | 360W max |
Software |
|
Connectivity |
Wifi, LAN, USB |