MakerGear M3SE Rev.1 | Ships Free

SKU:
MG-M3-SER1
Condition:
New
Availability:
Ships FREE anywhere in the continental USA - Use code SHIPITFREE at checkout
  • MakerGear M3-SE - Side
  • MakerGear M3-SE
$2,550.00

Description

Please note: MakerGear printers ship by UPS/FedEx Ground only. 

Significant updates to the MakerGear M3 SE Rev.1

True-leveling + Auto-Leveling

Offering exact calibration, assisted leveling, and superior adhesion along the entire build plate, 
the M3-SE Rev.1 introduces a BLTouch probe in order to expedite, manage, and improve the bed leveling process. 
Additionally, the printer then reads the build plate's surface to generate a mesh pattern, which serves as a guide 
for small Z-axis compensation that correct unavoidable variances from complete flatness.
 

Easily upgradable to independent dual print heads

The new M3SE comes ready to upgrade to an independent dual 3D printer. (Kits for this upgrade are not available yet, but will be in the future) 

Your MakerGear M3-SE Rev.1 comes with:

  • MakerGear M3-SE 3D Printer with V4 Hot End
  • Power Supply with Adjustable Input Voltage (115 V or 230 V)
  • Power Cord
  • 1 kg Spool of PLA Filament
  • 8 inch x 10 inch Borosilicate Glass print surface with applied film print surface
  • Tool Set
  • Sample print 
  • User Guide
  • 12-month limited warranty (extend your warranty by selecting one of the Extended MakerGear Warranty choices above) 

Warranty

New M3-SE's comes with a 12-month limited warranty.

MakerGear will replace all defective parts on M3-IDs as stipulated by warranty terms below. Replacement parts may be new or refurbished and will be shipped via FedEx Ground or USPS Priority in the US only. Exceptions – the MakerGear V4 hot-end is only covered under warranty when MakerGear filament and authentic MakerGear components are used. The twelve-month warranty does not cover machine abuse.

The 1 Year MakerGear Extended Warranty extends your MakerGear printer's basic warranty for an additional 12 months beyond its original expiration date, the 2 year Extended Warranty extends it for 24 months.

Please Note: Extended Warranty must be purchased in the same transaction as your MakerGear printer in order to be made effective.

M3-SE Specs

Build Dimensions
 
203 x 254 x 203 mm
Build Plate
Up to 130 °C.

Borosilicate glass build plate coated with polyimide film

Assisted Leveling Yes, True-Leveling + Auto Leveling
Filament Feed Direct (non-Bowden)
Materials 1.75 mm. ABS, ASA, HIPS, Nylon, PET-G, PET-T, PLA, polycarbonate, polypropylene, PVA, TPE, TPU, metal composites, wood composites, carbon fiber composites, and more
Nozzle
 
Ships with 0.35 mm brass
Maximum Extruding Temperature 40W heater and thermistor rated to 300 °C
Hot End Swappable V4 Hot End
Print Technology FFF (Fused Filament Fabrication)
X/Y Motion Independent axes with high precision linear rails guiding motion driven by Kevlar reinforced belts
Z Motion 10 mm rods guide motion driven by lead screw
Layer Resolution 0.020 - 0.350 mm (20-350 micron)
Print Head Travel Speed  80-450 mm/sec 
Ambient Operation Temperature 15˚C to 32˚C (59˚F to 90˚F)
Storage Temperature 0˚C to 32˚C (32˚F to 90˚F)
Operating Sound < 65 dBA
Machine Weight 12kg (26.5 lbs)
Machine Dimensions with Spool and Full Range of Motion
 
Width x Depth x Height: 533 mm (21") x 610 mm (24") x 533 mm (21”)
Shipping Box Dimensions
19 kg (42 lbs.) 535mm x 535mm x 535mm

(21" x 21" x 21”)

AC Input 100 - 120V (4 A)/220 - 240 V (2 A), 47 - 63 Hz
Power Requirements 24V DC @ 15 A
Power Consumption 360W max
Software
 
The latest version of OctoPrint for MakerGear is included with the M3-SE. With no proprietary software required, the MakerGear M3-SE is compatible with a wide variety of free and commercial software programs. Simplify 3D slicing software is recommended.
Connectivity

Wifi, LAN, USB

View AllClose