MakerGear M3ID Rev.0 | Independent Dual | Ships Free*
- Free Shipping
This REV.0 M3-ID is in stock and ready to ship!
NOTE: MakerGear printers ship by UPS/FedEx Ground only.
NOTE: This is the M3-ID Original/REV.0 - Click here for the new M3ID REV.1
Your M3-ID comes with
- MakerGear M3-ID 3D Printer with V4 Hot Ends
- Simplify3D 4.0 software license, at no additional cost
- Power Supply with Adjustable Input Voltage (115 V or 230 V)
- Power Cord
- Two 1 kg Spools of PLA (black and blue)
- 8 inch x 10 inch Borosilicate Glass print surface with applied film print surface
- Tool Set
- Sample print
- User Guide
- 12-month limited warranty (extend your warranty by selecting one of the Extended MakerGear Warranty choices above)
New M3-IDs comes with a 12-month limited warranty.
MakerGear will replace all defective parts on M3-IDs as stipulated by warranty terms below. Replacement parts may be new or refurbished and will be shipped via FedEx Ground or USPS Priority in the US only. Exceptions – the MakerGear V4 hot-end is only covered under warranty when MakerGear filament and authentic MakerGear components are used. The twelve-month warranty does not cover machine abuse.
The 1 Year MakerGear Extended Warranty extends your MakerGear printer's basic warranty for an additional 12 months beyond its original expiration date, the 2 year Extended Warranty extends it for 24 months.
Please Note: Extended Warranty must be purchased in the same transaction as your MakerGear printer in order to be made effective.
|Build Dimensions||Head 1 - 203 x 254 x 203 mm, Head 2 = 180 x 254 x 203 mm, Mimeo Mode = 100 x 254 x 203 per extruder|
|Build Plate||Up to 130°C. Borosilicate glass build plate coated with polyimide film|
|Assisted Leveling||Yes, True-Leveling|
|Filament Feed||Direct (non-Bowden)|
|Materials||1.75 mm. ABS, ASA, HIPS, Nylon, PET-G, PET-T, PLA, polycarbonate, polypropylene, PVA, TPE, TPU, metal composites, wood composites, carbon fiber composites, and more|
|Nozzle||Ships with 0.35 mm brass (0.25mm, 0.5mm, 0.75mm brass and 0.35mm and 0.50mm steel available)|
|Maximum Extruding Temperature||40 W heater and thermistor rated to 300 °C|
|Hot End||Independent dual extruders with swappable V4 Hot Ends|
|Print Technology||FFF (Fused Filament Fabrication)|
|X/Y Motion||Independent axes with high precision linear rails guiding motion driven by kevlar reinforced belts|
|Z Motion||10mm rods guide motion driven by lead screw|
|Layer Resolution||0.020 - 0.350 mm (20 - 350 micron)|
|Print Head Travel Speed||80-450 mm/sec|
|Ambient Operation Temperature||15˚C to 32˚C (59˚F to 90˚F)|
|Storage Temperature||0˚C to 32˚C (32˚F to 90˚F)|
|Operating Sound||<65 dBA|
|Machine Weight||13.5 kg (29.5 lbs)|
|Machine Dimensions with Spool and Full Range of Motion||
Width x Depth x Height:
533 mm x 610 mm x 533 mm (21”x24"x21")
|Shipping Box Dimensions||19 kg (42 lbs.) 535 mm x 535 mm x 635 mm (21" x 21" x 25”)|
|AC Input||100 - 120 V (4 A)/220 - 240 V (2 A), 47 - 63 Hz|
|Power Requirements||24 V DC @ 15 A|
|Power Consumption||360W max|
|Software||A Simplify3D 4.0 software license and the latest version of OctoPrint for MakerGear are included with the M3-ID. With no proprietary software required, the MakerGear M3-ID is compatible with a wide variety of free and commercial software programs.|
Wifi, LAN, USB