Matt PLA Dark Green Camouflage - 1.75mm 750g | Formfutura
Formfutura Matt PLA - Dark Green Camouflage
1.75mm diameter filament, 750g spool
Matt PLA is modified to have a rougher, matte surface finish.
Please Note: Since Matt PLA can have an abrasive effect on brass nozzles, Formfutura recommends using a hardened steel nozzle when printing.
Formfutura Matt PLA Print Settings
These settings are recommended by Formfutura and are meant as a starting point to help find your optimal print settings. They should work for most 3D printers; however, you may need to experiment outside these ranges. If you find settings that work better with your printer, feel free to let us know and we will be happy to post them.
Nozzle Size: ≥ 0.15mm
Layer Height: ≥ 0.10mm
Print Temp: ± 215 - 230°C
Fan Speed: 50-100%
Bed Temp: ± 0-60°C
No enclosure needed