Matte Finish

Matte Finish

  • Black Matte Fiber HTPLA Proto-Pasta Matte Fiber HTPLA Proto-Pasta Black

    Proto-Pasta

    Black Matte Fiber HTPLA - 1.75mm 500g | Proto-Pasta

    $40.00
    Black Proto-Pasta Matte Fiber HTPLA Same beautiful matte finish and same great performance as Carbon Fiber PLA Plant fibers are used instead of carbon fiber to obtain the same great finish Does NOT need a wear resistant nozzle or any special...
    $40.00
  • Blue Matte Fiber HTPLA Proto-pasta Matte Fiber HTPLA Proto-pasta Blue

    Proto-Pasta

    Blue Matte Fiber HTPLA - 1.75mm 500g | Proto-Pasta

    $40.00
    Blue Proto-Pasta Matte Fiber HTPLA Same beautiful matte finish and same great performance as Carbon Fiber PLA Plant fibers are used instead of carbon fiber to obtain the same great finish Does NOT need a wear resistant nozzle or any special...
    $40.00
  • Proto-Pasta Carbon Fiber HTPLA

    Proto-Pasta

    Carbon Fiber HTPLA - 1.75mm 500g | Proto-Pasta

    $39.00
    Carbon Fiber HTPLA Filament by Proto-Pasta  Prints easily No heated bed required Beautiful black matte finish  Improved surface hardness and less shrinkage than HTPLA Can be heat treated for higher temperature performance - see...
    $39.00
  • Proto-Pasta Original Carbon Fiber PLA

    Proto-Pasta

    Carbon Fiber PLA - 1.75mm 500g | Proto-Pasta

    $29.00
    Proto-pasta Carbon Fiber PLA Filament - 1.75mm, 500g Works on most PLA-compatible printers - we have found that it prints beautifully on our MakerGear M3 Great when you need a print with a matte finish and very few visible layer lines Deep black...
    $29.00
  • EasyCork Formfutura - Dark Formfutura EasyCork Dark

    Formfutura

    EasyCork Dark - 1.75mm 500g | Formfutura

    $40.00
    EasyCork Dark - Formfutura's PLA composite filament with approximately 30% cork fiber Lightweight Beautiful, cork-like appearance and feel Warp-free Easy to print on almost any FFF 3D printer EasyCork Filament Print Settings These settings are...
    $40.00
  • Formfutura EasyCork Light Formfutura EasyCork Light & Dark shown here

    Formfutura

    EasyCork Light - 1.75mm 500g | Formfutura

    $40.00
    Formfutura EasyCork Filament - Light  Light cork color  PLA composite filament with approximately 30% cork fiber Beautiful, cork-like appearance and feel Warp-free Easy to print on almost any FFF 3D printer EasyCork Filament Print...
    $40.00
  • EasyFil HIPS White Formfutura

    Formfutura

    EasyFil HIPS White - 1.75mm 750g | Formfutura

    $39.00
    White EasyFil HIPS (High Impact PolyStryene) Formfutura's easy to print HIPS filament Lightweight Heat resistant Responds well to adhesives Your finished print will have a smooth, matte finish Available in a beautiful, bright white  HIPS...
    $39.00
  • Formfutura EasyWood PLA - 50g EasyWood PLA samples

    Formfutura

    EasyWood - 1.75mm 50g Sample | Formfutura

    $4.99
    EasyWood by Formfutura - 1.75mm 50g Sample PLA based composite with approx. 40% wood fillings  Beautiful wood look and feel EasyWood Print Settings These settings are recommended by Formfutura and are meant as a starting point to help find...
    $4.99
  • Birch EasyWood Formfutura

    Formfutura

    EasyWood Birch - 1.75mm 500g | Formfutura

    $45.00
    Formfutura EasyWood Birch Filament PLA based composite 30%-40% wood particles Looks and smells like wood EasyWood Print Settings These settings are recommended by Formfutura and are meant as a starting point to help find your optimal print...
    $45.00
  • Cedar EasyWood Filament

    Formfutura

    EasyWood Cedar - 1.75mm 500g | Formfutura

    $45.00
    Formfutura EasyWood Cedar by Formfutura  Easy to print PLA-based composite 30%-40% wood particles Looks and smells like wood EasyWood Print Settings These settings are recommended by Formfutura and are meant as a starting point to help find...
    $45.00
  • Coconut EasyWood PLA by Formfutura

    Formfutura

    EasyWood Coconut - 1.75mm 500g | Formfutura

    $44.00
     Formfutura EasyWood Coconut Filament - beautiful PLA-based, wood composite filament Easy to use PLA based composite 30%-40% wood particles Looks, feels and smells like wood Available in a variety of other beautiful wood colors EasyWood...
    $44.00
  • EasyWood Filament- Ebony

    Formfutura

    EasyWood Ebony -1.75mm 500g | Formfutura

    $45.00
    EasyWood Ebony by Formfutura - beautiful PLA-based, wood composite filament Easy to print PLA based composite 30%-40% wood particles Looks, feels and smells like wood Available in a variety of other beautiful wood colors EasyWood Print...
    $45.00
  • Formfutura Easywood Olive

    Formfutura

    EasyWood Olive - 1.75mm 500g | Formfutura

    $45.00
    EasyWood Olive by Formfutura - beautiful PLA-based, wood composite filament Easy to print PLA based composite 30%-40% wood particles Looks, feels and smells like wood Available in a variety of other beautiful wood colors EasyWood Print...
    $45.00
  • Pine Formfutura EasyWood

    Formfutura

    EasyWood Pine - 1.75mm 500g | Formfutura

    $45.00
    EasyWood Pine by Formfutura - beautiful PLA-based, wood composite filament Easy to use PLA based composite 30%-40% wood particles Looks, feels and smells like wood Available in a variety of other beautiful wood colors EasyWood Print...
    $45.00
  • Formfutura Easywood Willow Google Home base printed in Easywood Willow

    Formfutura

    EasyWood Willow - 1.75mm 500g | Formfutura

    $45.00
    EasyWood Willow by Formfutura - beautiful PLA-based, wood composite filament Easy to print PLA based composite 30%-40% wood particles Looks, feels and smells like wood Available in a variety of other beautiful wood colors EasyWood Print...
    $45.00
  • On Sale
    Facilan C8 3D4Makers Facilan C8 Vase Sample Prints

    3D4MAKERS

    Facilan C8 - 1.75mm 750g | 3D4Makers

    Now: $49.00
    Was: $60.00
    3D4MAKERS Facilan C8 - a new compostable 3D printing filament designed to be a true manufacturing material; designed, built and manufactured to outperform. eco-friendly prints in a beautiful light grey color with a matte finish has higher impact...
    Now: $49.00
    Was: $60.00
  • On Sale
    Facilan C8  Facilan C8 Sample Prints

    3D4MAKERS

    Facilan C8 - 2.85mm 750g | 3D4Makers

    Now: $49.00
    Was: $60.00
    2.85mm 3D4MAKERS Facilan C8  eco-friendly prints in a beautiful light grey color with a matte finish has higher impact strength than ABS has higher tensile strength than ABS is tougher than standard PLA is compostable has a luxuriously soft...
    Now: $49.00
    Was: $60.00
  • 3D-Fuel Glass Filled PLA 3D-Fuel Glass Filled PLA filament

    3D-Fuel

    Glass Filled PLA - 1.75mm 500g | 3D-Fuel

    $39.00
    Glass Filled PLA Filament by 3D-Fuel  3D-Fuel tested 3D printed parts in Standard PLA and Glass Filled PLA and found that Glass Filled PLA is: 1.4 times stronger 1.3 times tougher 1.9 times more flexible Like standard PLA, Glass Filled PLA...
    $39.00
  • Out of stock - check back soon!
    Proto-pasta Matte Fiber HTPLA Gray Proto-pasta Matte Fiber HTPLA Gray

    Proto-Pasta

    Gray Matte Fiber HTPLA - 1.75mm 500g | Proto-Pasta

    $40.00
    Gray Proto-Pasta Matte Fiber HTPLA Same beautiful matte finish and same great performance as Carbon Fiber PLA Plant fibers are used instead of carbon fiber to obtain the same great finish Does NOT need a wear resistant nozzle or any special...
    $40.00
  • Out of stock - check back soon!
    Proto-Pasta Magnetic Iron PLA

    Proto-Pasta

    Magnetic Iron PLA - 1.75mm 500g | Proto-Pasta

    $35.00
    Magnetic Iron PLA by Proto-Pasta - Rustable Filament We use this filament a lot at Partsbuilt 3D and it produces some of the most beautiful prints we have seen, with a beautiful matte finish and feel. Scroll down for sample photos and check back often...
    $35.00
  • Orange Matte Fiber HTPLA Proto-pasta Orange Matte Fiber HTPLA Proto-pasta

    Proto-Pasta

    Orange Matte Fiber HTPLA - 1.75mm 500g | Proto-Pasta

    $40.00
    Orange Proto-Pasta Matte Fiber HTPLA Same beautiful matte finish and same great performance as Carbon Fiber PLA Plant fibers are used instead of carbon fiber to obtain the same great finish Does NOT need a wear resistant nozzle or any special...
    $40.00
  • On Sale
    Polymaker PolyWood

    Polymaker

    PolyWood - 1.75mm 600g | Polymaker

    Now: $49.00
    Was: $57.00
    PolyWood Filament by Polymaker - 1.75mm 600g Unique foaming technology to deliver a filament material that mimics wood structurally Composed entirely of polymers Excellent print quality without the risk of nozzle jams The density of PolyWood is on...
    Now: $49.00
    Was: $57.00
  • Red Matte Fiber HTPLA Proto-pasta Red Matte Fiber HTPLA Proto-pasta

    Proto-Pasta

    Red Matte Fiber HTPLA - 1.75mm 500g | Proto-Pasta

    $40.00
    Red Proto-Pasta Matte Fiber HTPLA Same beautiful matte finish and same great performance as Carbon Fiber PLA Plant fibers are used instead of carbon fiber to obtain the same great finish Does NOT need a wear resistant nozzle or any special...
    $40.00
  • Out of stock - check back soon!
    Proto-Pasta Polishable Stainless Steel PLA

    Proto-Pasta

    Stainless Steel PLA - 1.75mm 500g | Proto-Pasta

    $50.00
     Stainless Steel PLA - perfect for costumes & props! Easy to print, metal-like prints Can be brushed, sanded, or polished post-printing for beautiful finish No heated bed required Usable on most PLA-compatible printers, such as...
    $50.00
  • Formfutura StoneFil Concrete Stonefil sample prints

    Formfutura

    StoneFil Concrete - 1.75mm 500g | Formfutura

    $40.00
    Concrete StoneFil by Formfutura - PLA composite stone filament composed of 50% powdered stone Matte, stone-like finish Each individual print will have a unique, natural stone coloring 50% stone filing results in filament that is ±37% heavier...
    $40.00
  • Formfutura StoneFil Granite Stonefil example prints

    Formfutura

    StoneFil Granite - 1.75mm 500g | Formfutura

    $39.95
    Granite StoneFil by Formfutura - PLA composite stone filament composed of 50% powdered stone Matte, stone-like finish Each individual print will have a unique, natural stone coloring 50% stone filing results in filament that is ±37% heavier...
    $39.95
  • Out of stock - check back soon!
    Formfutura StoneFil Pottery Clay Stonefil example prints

    Formfutura

    StoneFil Pottery Clay - 1.75mm 500g | Formfutura

    $39.95
    Pottery Clay StoneFil by Formfutura - PLA composite stone filament composed of 50% powdered stone Matte, stone-like finish Each individual print will have a unique, natural stone coloring 50% stone filing results in filament that is ±37%...
    $39.95
  • Formfutura Terra Cotta Stonefil Stonefil example prints

    Formfutura

    StoneFil Terra Cotta - 1.75mm 500g | Formfutura

    $40.00
    Terra Cotta StoneFil by Formfutura - PLA composite stone filament composed of 50% powdered stone Matte, stone-like finish Each individual print will have a unique, natural stone coloring 50% stone filing results in filament that is ±37%...
    $40.00
  • Formfutura - Volcano PLA 50g

    Formfutura

    Volcano PLA - 1.75mm 50g Sample | Formfutura

    $4.99
    1.75mm, 50g sample of Volcano PLA by Formfutura Industrial grade PLA, with similar properties to ABS after annealing. Volcano PLA Print Settings These settings are recommended by Formfutura and are meant only as a starting point to help find your...
    $4.99
  • Out of stock - check back soon!
    Proto-pasta Matte Fiber HTPLA White Proto-pasta Matte Fiber HTPLA White

    Proto-Pasta

    White Matte Fiber HTPLA - 1.75mm 500g | Proto-Pasta

    $40.00
    White Proto-Pasta Matte Fiber HTPLA Same beautiful matte finish and same great performance as Carbon Fiber PLA Plant fibers are used instead of carbon fiber to obtain the same great finish Does NOT need a wear resistant nozzle or any special...
    $40.00