MetalFil - 1.75mm 50g Sample | Formfutura



MetalFil by Formfutura - 1.75mm 50g Sample

MetalFil Print Settings

These settings are recommended by Formfutura and are meant as a starting point to help find your optimal print settings. They should work for most 3D printers; however, you may need to experiment outside these ranges. If you find settings that work better with your printer, feel free to let us know and we will be happy to post them.

Nozzle Size: >0.40mm

Print Temp: ± 190 - 220° C

Bed Temp: ± 0-60° C

Fan Speed: 50-100%

Print Speed: Medium

Flow Rate: ± 104%

Retraction: Yes, ± 5mm

Print Surface: GeckoTek, BuildTak, Kapton Tape


View AllClose