Micro Swiss

Micro Swiss All Metal Hot End Upgrade Kit Kit includes 0.40mm nozzle Buy Micro Swiss MK8 nozzles in other sizes here Key benefits of the Micro Swiss All Metal Hotend: No printer modification needed - this kit is a drop-in replacement for...

Micro Swiss All Metal Hot End for Creality CR10S Pro Kit comes standard with a 0.40mm nozzle. Shop other Micro Swiss Mk8 nozzle sizes here Key benefits of the Micro Swiss All Metal Hotend: A common complaint of the CR10S Pro is that it uses...

Micro Swiss All Metal Hotend Kit for Flashforge Finder/Inventor 2/Guider 2, 2S /Dremel 3D40 This is an all metal hotend upgrade kit for Flashforge Finder, Inventor 2 and Guider 2 printers Micro Swiss' all metal hotend allows you to print at much higher...

All Metal Hotend with Slotted Cooling Block for Duplicator 6 This is the Micro Swiss all metal hotend kit for Wanhao Duplicator 6 with the following improvements: Significantly better heat transfer  Slotted clamping system No set screw to ding...

All Metal Hotend Kit with Slotted Cooling Block for Wanhao i3 This is the Micro Swiss all metal hotend upgrade with redesigned cooling block for Wanhao i3, Wanhao i3 Plus and all other i3 clones with the following...

Original Creality CR-10s Pro Nozzle with M6x.75mm Threads | 0.60mm  The Micro Swiss plated wear resistant nozzle starts as a precision machined brass nozzle and than has the Micro Swiss TwinClad XT coating applied. The result is a...

Original CR-10s Pro Nozzle with M6x.75mm Threads | 0.40mm  The Micro Swiss plated wear resistant nozzle starts as a precision machined brass nozzle and than has the Micro Swiss TwinClad XT coating applied. The result is a premium nozzle...

Micro Swiss Lightweight Direct Drive Extruder (Extruder Only) This is the "extruder only" version and does not include a hotend. The Micro Swiss All Metal Hotend is available for purchase here Fits: Creality CR-10 Creality CR-10-S5 Creality...

Micro Swiss Lightweight Direct Drive Extruder with All Metal Hotend This version includes a Micro Swiss All Metal Hotend. The "Extruder Only" version is available for purchase here. Fits: Creality CR-10 Creality CR-10-S5 Creality...

Micro-Swiss MK10 A2 Tool Steel Wear-Resistant Nozzle - 0.40mm  Note: This nozzle will only fit Micro Swiss MK10 All Metal Hotend Kits. This nozzle has completely different internal dimensions to work with the Micro...

Micro-Swiss MK10 A2 Tool Steel Wear-Resistant Nozzle - 0.60mm  Note: This nozzle will only fit Micro Swiss MK10 All Metal Hotend Kits. This nozzle has completely different internal dimensions to work with the Micro...

Micro-Swiss MK10 A2 Tool Steel Wear-Resistant Nozzle - 0.80mm    Note: This nozzle will only fit Micro Swiss MK10 All Metal Hotend Kits. This nozzle has completely different internal dimensions to work with...

MK10 All Metal Hotend Kit - Micro Swiss Nozzle Size: 0.40mm This is an all metal hotend upgrade for MK 10 style extruders. The lower portion of the thermal break is made from stainless steel (strong with low thermal conductivity), the...

MK10 Plated Wear-Resistant Nozzle for PTFE-Lined Hotend M7 Threads - 0.40mm This is a MK10 style nozzle, made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction...

Micro Swiss MK10 Plated Wear-Resistant Nozzle - 0.50mm  Note: This nozzle will only fit Micro Swiss MK10 All Metal Hotend Kits. This nozzle has completely different internal dimensions to work with the Micro Swiss thermal barrier tube...

MK10 Plated Wear-Resistant Nozzle for PTFE-Lned Hotend M7 Threads - 0.50mm This is a MK10 style nozzle, made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It...

MK10 Plated Wear-Resistant Nozzle for PTFE-Lined Hotend M7 Threads - 0.60mm This is a MK 10 style nozzle, made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction...

Micro-Swiss MK8 A2 Tool Steel Wear-Resistant Nozzle - 0.40mm  Wear-resistant MK8 nozzle, made from a A2 tool steel, heat treated to 57-62 RC and plated with TwinClad XT coating.  Perfect for printing with abrasive...

Micro-Swiss MK8 A2 Tool Steel Wear-Resistant Nozzle - 0.60mm (M6x1) MK8 nozzle made from A2 tool steel, heat treated to 57-62 RC and plated with TwinClad XT coating.  If you are working with abrasive carbon fiber, stainless...

Micro Swiss MK8 Wear Resistant Nozzle - 0.20mm Made from a 360 brass base material and plated with TwinClad XT coating, a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of friction, and is very...

Micro Swiss MK8 Wear Resistant Nozzle - 0.30mm Made from a 360 brass base material and plated with TwinClad XT coating, a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of friction, and is very...

Micro Swiss MK8 Wear Resistant Nozzle - 0.40mm Made from a 360 brass base material and plated with TwinClad XT coating, a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of friction, and is very...

Micro Swiss MK8 Wear Resistant Nozzle - 0.60mm Made from a 360 brass base material and plated with TwinClad XT coating, a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of friction, and is very...

Micro Swiss MK8 Wear Resistant Nozzle - 0.80mm Made from a 360 brass base material and plated with TwinClad XT coating, a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of friction, and is very...

MK8 Thermal Tube Upgrade Made with TwinClad XT coated stainless steel. This Electroless Nickel composite coating is very low friction and used a lot in injection molding for its release properties. The TwinClad XT coating will help prevent clogging...

M2 Hardened High Speed Steel Nozzle RepRap - M6 Thread 1.75mm Filament The M2 nozzles are designed for high temperatures, abrasion resistance and with superior non-stick properties. Nozzles are machined from M2 high speed steel, hardened and...

M2 Hardened High Speed Steel Nozzle RepRap - M6 Thread 1.75mm Filament The M2 nozzles are designed for high temperatures, abrasion resistance and with superior non-stick properties. Nozzles are machined from M2 high speed steel, hardened and...

M2 Hardened High Speed Steel Nozzle RepRap - M6 Thread 1.75mm Filament The M2 nozzles are designed for high temperatures, abrasion resistance and with superior non-stick properties. Nozzles are machined from M2 high speed steel, hardened and...

Micro-Swiss E3D Compatible Nozzle, Plated A2 Tool Steel, M6 Threads - 0.40mm This is a RepRap style nozzle, made from A2 tool steel, heat treated to 57-62 RC and plated with TwinClad XT coating.  Use this plated steel nozzle when...

Micro-Swiss E3D Compatible Nozzle, Plated A2 Tool Steel, M6 Threads - 0.60mm This is a RepRap style nozzle, made from A2 tool steel, heat treated to 57-62 RC and plated with TwinClad XT coating.  Use this plated steel nozzle when...

Micro-Swiss E3D Compatible Nozzle, Plated A2 Tool Steel, M6 Thread - 0.80mm This is a RepRap style nozzle, made from a A2 Tool Steel, heat treated to 57-62 RC and plated with TwinClad XT coating.  Use this plated steel nozzle when...

Micro-Swiss Robo 3D Wear-Resistant Nozzle with M6 Threads - 0.30mm This is a M6 thread, Hexagon hotend style nozzle, made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating...

Micro Swiss Wear-Resistant Nozzle for Robo 3D Printers - 0.40mm   This is a M6 thread, hexagon hotend style nozzle, made from a 360 brass base material and plated with abrasion-resistant TwinClad XT coating. If you are working...

Micro Swiss Wear-Resistant Nozzle for Robo 3D - 0.50mm  For 1.75mm diameter filament. This is a M6 thread, Hexagon hotend style nozzle. It is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a...

Micro Swiss Wear-Resistant Nozzle for Robo 3D - 0.80mm  This is a M6 thread, Hexagon hotend style nozzle. It is made from a 360 brass base material and plated with TwinClad XT coating, for abrasion resistance.  If you are...

Thermal Break for Micro Swiss All Metal Hotend Kit for CR10 Printers Replacement heat break for Micro-Swiss All Metal Hotend Kit Made from Grade 5 Titanium Fits Micro Swiss All Metal Hotend kit for Creality CR10/Ender 3D printers  Micro...