Micro Swiss & Compatible

  PTFE liners for Micro Swiss Direct Drive Kits and All Metal Hotend (Pack of 5) Capricorn PTFE liners for Micro Swiss Direct Drive Kits and All Metal Hotend for CR10 and Ender printers. Runs between the extruder and hotend. Includes: PTFE tube...

CopperBlock™ MK8 Hot Block Nickel composite coated copper hot block for increased thermal conductivity. Allows for the use of a bead or 3mm cartridge style thermistor and is great for high temperature printing, up to 485c. Includes:Heater block...

  Micro Swiss Dual Gear Bowden Extruder This Bowden Dual Gear Extruder features the same quality construction as the Micro Swiss Direct Drive extruders. It is designed to be a bolt-on replacement to most of...

  All Metal Hotend Kit for Creality CR-6 SE / CR-6 MAX / CR-10 Smart Kit comes standard with a  0.40mm  MK8 nozzle. Fits:CR-6 SECR-6 SE MaxCR-10 Smart *Fan Adapter required Installation Instruction Video by Embrace Making for...

  Micro Swiss Plated Wear Resistant Nozzle This nozzle is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest coefficient...

  Tension hardware kit for Direct Drive Extruder This is a spare tension hardware kit for Micro Swiss Direct Drive kit for CR-10 / Ender printers.  Includes:Tension Pin (1 pcs)Spring (1 pcs)Tension Knob (1 pcs) Fits: Micro Swiss...

  Tension lever for Micro Swiss Direct Drive Extruder This is a spare tension lever for Micro Swiss Direct Drive kit for CR-10 / Ender printers.  Includes:Lever (1 pcs)Gear (1 pcs)Shoulder bolt (1 pcs)

Motor Gear for Direct Drive Extruder Spare motor gear for Micro Swiss Direct Drive kit for CR-10 & Ender printers.  Precision CNC machined teeth Hardened tool steel Includes:Gear (1 pcs)Set screw (1 pcs)Hex wrench (1 pcs)

  Hardware Kit for Direct Drive Extruder Spare hardware kit for Micro Swiss Direct Drive kit for CR-10 / Ender printers.  Includes:Beveled PTFE liner (1 pcs)M3 x .5 x 6mm Screws (3 pcs)M5 x .8 x 20mm Nylon Patch Screw (2 pcs)M5 x .8 x...

  Extension Cable for Direct Drive Extruder Spare Extension Cable for Micro Swiss Direct Drive kit for CR-10 & Ender printers.  Length: 67cm

Main Body for Micro Swiss Direct Drive Extruder on Linear Rail System Fits:Printers with MGN12 Linear Rail with MGN12H Carriage BlockOnly for printers with bottom belt mounting position Includes:1x Main Extruder body1x Linear Rail mounting...

  Main Body for Micro Swiss Direct Drive Extruder configured for ExoSlide System Fits: Printers with ExoSlide System Includes:1x Main Extruder body2x M4 x .7 x 16mm ExoSlide mounting screws CNC Machined and Assembled in USA

Micro Swiss MK8 All Metal Hotend Kit Micro Swiss' all metal hotend allows you to print at much higher temperatures than with PTFE-lined hotend.  Another benefit of this all metal hotend design is more consistent melt chamber control. During slow...

MK8 M2 Hardened High Speed Steel Nozzle  Size: Select Above Includes: Nozzle (1 pcs) The M2 nozzles are designed for high temperatures, abrasion resistance and with superior non-stick properties. Nozzles are machined from M2 high...

  Micro Swiss Lightweight Direct Drive Extruder (Extruder Only Version) This is the "extruder only" version and does not include a hotend. The Micro Swiss All Metal Hotend is available for purchase here  Important Note There has been...

  Micro Swiss Lightweight Direct Drive Extruder with All Metal Hotend This version includes a Micro Swiss All Metal Hotend. The "Extruder Only" version is available for purchase here.  Important Note There has been an...

PB Select™ Silicone Socks - 3 Pack The primary purpose of a silicone sock is to help keep your hotend at a more consistent temperature, reducing the amount of times your heater needs to cycle. As an added benefit, the silicone sock will keep...

  Super Lube 82340 - Synthetic Grease with SYNCOLON™ (PTFE)  This small size pouch is great for lubing the filament drive gears on dual gear or orbiting gear extruders. Includes: 1 Pouch Size: 1 cc Contains no...

  PTFE liner for Micro Swiss Direct Drive Kits and All Metal Hotend Capricorn PTFE liner for Micro Swiss Direct Drive Kits and All Metal Hotend for CR10 and Ender printers. Includes: PTFE tube (1 pcs) Specifications:50mm long Beveled...

Heat Break (Thermal Tube) for Micro Swiss MK10 All Metal Hotend Kits This is a replacement heat break for the Micro Swiss MK10 All Metal Hotend Kit. Includes: Heat break (1 pcs) Thread: M7 Fits:Micro Swiss MK10 / MK11 HotendsFlashForge Creator...