MK3/S/+

BuildTak PEI Sheets - 9x10  Sold in pack of 2 sheets An ideal print surface for the Original Prusa i3 MK2 and MK3 Printers and other 9x10 print beds. Manufactured right here in the USA to ensure consistent quality and composition,...

Anti Vibration foot Includes: Anti vibration foot (1 pcs) To replace this part, please consult the Prusa Assembly Manuals. Make sure to follow the manual for your printer model

Bearing Clips Includes:  Bearing Clip (3 pcs) Screws (6 pcs) Nyloc Nuts (6 pcs) Fits: MK3S+  Note: Bearings not included To replace this parts, please consult the Prusa Assembly Manuals. Make sure to follow...

Heated Bed Spacer Includes: Stainless Steel Bed Spacer (2 pcs) Fits: MK3 MK3S MK3S+ To replace this part, please consult the Prusa Assembly Manuals. Make sure to follow the manual for your printer model.

2GT Timing Belt for X-axis Includes: Timing belt for X-axis (1 pcs)  Specifications: Type: 2GT Length: 850 mm Width: 6 mm Pitch: 2 mm   Fits:   MK2 MK2S MK2.5 MK2.5S MK3 MK3S MK3S+   To replace this part,...

2GT Timing Belt for Y-axis Includes: Timing belt for Y-axis (1 pcs)  Specifications: Type: 2GT Length: 650 mm Width: 6 mm Pitch: 2 mm Fits:   MK2 MK2S MK2.5 MK2.5S MK3 MK3S MK3S+   To replace this part, please...

Boron Nitride Thermal Paste (BN Paste) Thermal paste improves heat conduction and heat distribution in the hotend. This is the best Boron Nitride paste we could find! Contains high quality ZYP™ Boron Nitride and proprietary binders which...

Heatsink Collet This is a replacement collet for the hotend heatsink Includes: Heatsink Collet (1 pcs)  Fits: MK2 MK2S MK2.5 MK2.5S MK3 MK3S MK3S+ To replace this part, please consult the Prusa Assembly Manuals. Make sure to...

Bimetal Copper V6 Heat Break This bimetal heat break is comprised of copper and stainless steel. The thin stainless steel tube used as the break, reduces heat transfer to the cold end. While the copper on both the hotend and cold end increase...

Copper Heater Block Includes:  Copper heater block (1 pcs) Setscrew for thermistor (1 pcs) Clamping screw for heater (1 pcs) Fits: E3D V6 Hotends RepRap Hotends Prusa i3 series

RepRap Plated Copper Nozzle Includes: 0.40mm Nozzle (1 pcs) These high precision copper nozzles are great for printing everything from PLA to PEEK. they have a much higher thermal conductivity than brass and can handle high...

RepRap Plated Copper Nozzle Includes: 0.60mm Nozzle (1 pcs) These high precision copper nozzles are great for printing everything from PLA to PEEK. they have a much higher thermal conductivity than brass and can handle high...

Dual Ball Bearing Blower Fan Cools the part being printed. Known as the part cooling or print cooling fan Dual Ball Bearing  5V 5000 RPM Includes: Blower fan w/latching dupont connector (1 pcs) Fits: Prusa MK3 Prusa MK3S Prusa...

Einsy RAMBo Mainboard This Einsy RAMBo has the MK3 firmware pre-installed. It does NOT have the MK3S/+ firmware pre-installed. Includes:  Einsy RAMBo with MK3 firmware (1 pcs) Plug Aligner plastic part (1 pcs) ATO Blade fuses 5A...

Einsy RAMBo Mainboard This Einsy RAMBo has the MK3S/+ firmware pre-installed. It does NOT have the MK3 firmware pre-installed. Includes:  Einsy RAMBo with MK3S/+ firmware (1 pcs) Plug Aligner plastic part (1 pcs) ATO Blade fuses 5A...

Replacement Blower Fan Specs Hydraulic Sleeve Bearing Rated voltage: 5V DC Dimensions: 50x15 mm Cable length: 750mm (Approximate)   Fits: Prusa MK3 Prusa MK3S Prusa MK3S+ Prusa MINI Prusa MINI+

Print (Part) Cooling Blower Fan This is the fan that cools the part being printed Includes: Print cooling fan (1 pcs) Fits: MK3 MK3S MK3S+ MINI MINI+ To replace this part, please consult the Prusa Assembly Manuals. Make sure to follow...

Noctua Hotend Fan This is a replacement Noctua hotend fan. Note: This is ONLY a direct fit replacement for the MK3, MK3S and MK3S+. Includes: Hotend fan (1 pcs) Specifications: Dimensions: 40×40×10 mm Connector: Molex...

Replacement Heatsink Fan for Prusa i3 MK3/S Specs: Hydraulic Sleeve Bearing Rated voltage: 5V DC Dimensions: About 40 x 40 x 10 mm Cable length: 750mm (approx) Fits: Prusa MK2.5 Prusa MK2.5S Prusa MK3 Prusa MK3S Prusa MK3S+

Filament Sensor This is the replacement filament sensor. It is ONLY compatible with the MK2.5 and MK3. Note: This is NOT compatible with the MK2.5S and MK3S. Includes: Filament sensor (1 pcs)  Fits: MK2.5 MK3 To replace this...