MK4/S

Nozzle Cleaning Needle 0.3mm Diameter Includes: needle (5 pcs)  

PB Select Nozzle Coat™  Nozzle Coat is a water-based PTFE nano coating for your nozzle & heater block. Using Nozzle Coat will help reduce the amount of plastic that sticks to the exterior of your nozzle & heater block...

PB Select™ Preset Torque Wrench  Includes:Preset Torque wrench (1 pcs)Bit holder FDM printed in POP Green ASA (1 pcs)1/4 inch socket adapter (1 pcs)6mm socket (1 pcs)7mm socket (1 pcs)8mm socket (1 pcs) Notes:Use on a clean...

Nozzle Wrench Handy little wrench for removing nozzles. Includes: Wrench (1 pcs) Sizes: 7.0 mm (RepRap, E3D, Nextruder Etc)5.5 mm5.0 mm4.5 mm (Sidewinder X3/X4) Fits:E3D V6 NozzlesPrusa Nextruder standard and highflow nozzles7mm RepRap...

PB Select™ Nylon Spacer for Prusa Nextruder This is the spacer the seats into the Nextruder PG cover on the below listed printers.  Includes: Spacer (1 pcs) Size: 13x24x2,5mm Fits:Prusa MK3.9Prusa MK4Prusa XL Will also fits the...

NYLON 3x555 mm Includes: NYLON 3x555 mm (1 pc) Fits: Prusa MK3.9Prusa MK3.9SPrusa MK4Prusa MK4SPrusa XL To replace this part, please visit the Prusa knowledge base at help.prusa3d.com

9mm SAC-1 Stainless-Steel Graphics Knife with 30-Degree Precision Blade High-quality precisely made stainless steel precision knife with an acute 30° snap angle for enhanced cutting control. Each blade offers seven cutting segments per blade...

Replacement Blades for the Olfa SAC-1 Precision Knife  High-quality precisely made stainless steel 9 mm blades with an acute 30° snap angle for enhanced cutting control. Each blade offers seven cutting segments per blade...

Original Prusa MK4 to MK4S Upgrade Kit The MK4->MK4S Upgrade Kit contains everything you need to fully upgrade your stock MK4 3D printer to the new MK4S. This upgrade is supplied as a kit - you need to assemble it yourself. Before you order...

Original Prusa CHT Brass Nozzle These are the same nozzles that come stock on the new Prusa MK4S printers. Includes: CHT Brass Nozzle (1 pcs) Fits:Prusa CORE OnePrusa MK3.9Prusa MK3.9SPrusa MK4Prusa MK4SPrusa XL To replace this part, please...

Nextruder Hotend Assembly with Brass Nozzle Fully assembled hotend for the Nextruder Nozzle Size: Select Above Includes:Nozzle of Selected Size (1pcs)Heaterblock (1pcs)Heater 40 W - 120 mm (1pcs)Thermistor NTC 100k - 115 mm...

Nextruder Hotend Assembly with High Flow CHT Brass Nozzle Fully assembled hotend for the Nextruder. This hotend comes with the High Flow CHT nozzle Nozzle Size: Select above  Includes:Prusa Brass High Flow CHT Nozzle* (1pcs)Heaterblock...

Nextruder Nozzle (choose size above) All-metal high-precision nozzle for the Nextruder combines both nozzle and heat break into one unit for leak free printing. Includes: Nozzle (1 pcs) Fits:CORE OneMK3.9MK3.9SMK4MK4SXL For the new generation of...

Nextruder V6 Nozzle Adapter This adapter makes your Nextruder compatible with any V6 nozzle. You can use it with the Original Prusa XL, MK3.9, MK4 and CORE One Includes: Adapter (1 pcs) Fits:CORE OneMK3.9MK3.9SMK4MK4SXL Note: Nozzle not...

Double-Sided textured PEI powder-coated spring steel sheet These sheets have MK3 printed on them, but will fit all the below listed printers.  Powder coating directly on metal makes it very hard to damage this build plate. If a heated nozzle...

Double-sided Satin PEI Powder-coated Spring Steel Sheet for the Original Prusa i3 Series Includes: Satin spring steel sheet (1 pcs) Prusa's satin sheet sits between the smooth and textured variants. Its powder-coated surface with...

Double-Sided textured PEI powder-coated spring steel sheet Powder coating directly on metal makes it very hard to damage this build plate. If a heated nozzle crashed into it, the metal can dissipate the heat. Powder coating also gives the surface a...

Double-sided Powder-coated PA Nylon Spring Steel Sheet Includes: Spring steel sheet (1 pcs) This print sheet is specially designed to print polyamide-based filaments, especially the Prusament PA11 Carbon Fiber Black. The PA11-type...

Double-sided Powder-coated PP Spring Steel Sheet Includes: Spring steel sheet (1 pcs) This print sheet is specially designed to print polypropylene-based filaments, especially the Prusament PP Carbon Fiber Black. The PP-type...

Original Prusa Spring Steel Sheet with Smooth Double-sided PEI This is the replacement spring steel sheet with smooth double-sided PEI for the Original Prusa i3 magnetic heatbeds. Perfect for PLAGreat adhesion with almost all materialsSmooth bottom...