Mosquito Magnum Hotend from Slice Engineering

Newly updated Mosquito™ Magnum (latest version, with coated heat break)

The Mosquito Magnum is best for nozzle sizes 0.40mm or larger. You can use a smaller nozzle, but it will be more difficult to print detail than with a standard Mosquito hotend.

Be sure to select a 12v or 24v fan above, if needed.

Installation instructions 

Mosquito assembly/disassembly instructions

Features:

• Bondtech BMG-M compatible 
• For 1.75mm diameter filament
• Extended melt zone, so you can print faster and still achieve the high resolution benefits achieved with the standard Mosquito
• Melt zone is extended upwards, so the the Mosquito Magnum is the same size as the standard Mosquito Hotend

Optional Parts (not included):
For 12v printers: Mosquito Heater Cartridge 12 volt
For 24v printers: Mosquito Heater Cartridge 24 volt

Find other Slice Engineering hot end parts here 

Buy the Standard Slice Mosquito hotend here

Buy the Bondtech BMG-M extruder here. It has been designed specifically for the Slice Mosquito hotends and is a great upgrade over stock extruders.