Nylon GFX™ Glass Filled Nylon 1.75mm 500g | PBX Filaments™
Nylon GFX™ Glass Filled Nylon Filament - 500g
Nylon GFX is a strong glass filled nylon filament that produce a more rigid print than nylon alone. Since glass filled filament tends to have less build up inside the nozzle than carbon fiber it is less likely to clog your extruder over time. This would be a great choice for printing the Bondtech DualDrive extruder upgrade for the MakerGear M3 3D printer.
Manufactured in the USA, PBX Filaments™ produces industrial quality filaments of extremely consistent quality and diameter.
Diameter: 1.75mm +/- 0.005mm
As with all nylon filaments, it is recommended to dry your filament for at least 3 hours at 70c before printing.
Nozzle Temp: 240-265c (255c is a good starting point)
Bed Temp: 40-70c (50c is a good starting point)
Print Speed: 30-140 (60mm/s is a good starting point)
Nozzle: .40mm or larger. Use a hardened wear resistant nozzle
Layer Height: 0.20 mm or higher, depending on nozzle size
Cooling Fan: as needed - We usually print with our cooling fan set to 0 for the print and 100% for bridging.
|Density (gcm-3)||ASTM D792||1|
|Heat Deflection Temperature (°C)||ASTM D648 at 66 psi||166|
|Flexural Peak Stress (psi)||ASTM D790||12,399|
|Flexural Modulus (psi)||ASTM D790||385,000|
|Tensile Strength at Yield (psi)||ASTM D638, Type IV||9,620|
|Tensile Elongation (%)||ASTM D638, Type IV||8|
|Notched Izod Impact (Jm-1)||ASTM D256||