NylonPlus™ Blue - 1.75mm 750g | PBX Filaments™
NylonPlus™ Blue - Industrial Grade Nylon Filament
NylonPlus™ is a specially formulated Co-Polymer designed for strong end use parts and easy printing.
Manufactured in the USA, PBX Filaments™ produces industrial quality filaments of extremely consistent quality and diameter.
Diameter: 1.75mm +/- 0.005mm
As with all nylon filaments, it is recommended to dry your filament for at least 3 hours at 70c before printing.
Nozzle Temp: 240-265c (255c is a good starting point)
Bed Temp: 40-70c (50c is a good starting point)
Bed Adhesion: Glass with a coat of PVA or PVP
Print Speed: 30-140 (60mm/s is a good starting point)
Nozzle: .25 or larger
Layer Height: 0.20 mm or higher, depending on nozzle size
Cooling Fan: as needed - We usually print with our cooling fan set to 0 for the print and 100% for bridging.
|Melt Flow Index/ g/10 mins||ASTM D1238||43600||Dependent on color. Tested at < 400 ppm moisture|
|Density (gcm-3)||ASTM D792||1.14|
|Heat Deflection Temperature (°C)||ASTM D648 at 66 psi||110|
|Flexural Peak Stress (psi)||ASTM D790||6403|
|Flexural Modulus (kpsi)||ASTM D790||151|
|Tensile Strength at Break (psi)||ASTM D638, Type IV||6072|
|Tensile Strength at Yield (psi)||ASTM D638, Type IV||7582|
|Tensile Elongation (%)||ASTM D638, Type IV||27|
|Tensile Modulus/ kpsi *||ASTM D638, Type IV||200|
|Notched Izod Impact (Jm-1)||ASTM D256||360|
* 3D printed, 100 % solid, y-axis orientation