PC-MAX | Polymaker

  • PC-MAX - PolyMaker
  • PC-MAX - side

Sold Out - Notify me when back in stock


PC-Max by Polymaker

An advanced polycarbonate based filament designed specifically for desktop FDM/FFF printers.

A great choice for prints with engineering applications:

  • High printing quality
  • Great mechanical strength
  • Heat resistant
  • Excellent impact strength
  • Fracture toughness

Polymaker PC-Max Print Settings

These settings are recommended by Polymaker and are meant as a starting point to help find your optimal print settings. They should work for most 3D printers; however, you may need to experiment outside these ranges. If you find settings that work better with your printer, feel free to let us know and we will be happy to post them.

Nozzle Size: Any

Print Temp: 250-270c

Bed Temp: 80c

Fan Speed: Off

Print Speed: 60mm/s

Flow Rate: 100

Retraction: 1mm

Print Surface: GeckoTek, BuildTak, Kapton Tape. Use a coat of Dimafix Pen, if needed.

Other: A raft is recommended, set separation distance to 0.30mm

View AllClose