PEEK - PEI - PPSU - PAPC

PEEK - PEI - PPSU - PAPC

  • PPEPS From Taulman3D

    Taulman3D

    taulman3D PPEPS (UL94 V0/5VA rated) 1.75mm 1lb

    $40.00
    Taulman3D PPEPS - Polyphenylene ether and polystyrene filament The Aerospace Industry, like the automotive industry has not taken on a greater percentage of filament based 3D printing due to the lack of a material that meets temperature...
    $40.00
  • PEI Ultem 3D4Makers PEI Ultem Label

    3D4MAKERS

    3D4Makers PEI (Ultem 1010) 1.75mm 200g

    $79.95
    1.75mm 200g PEI - Ultem 1010 filament 500g also available PEI (Polyether Imide) Ultem is an amorphous, amber-transparent thermoplastic with a glass transition temperature (Tg) of 217 °C and performs in continuous use up to 170 °C. This...
    $79.95
  • PAPC Filament PAPC sample prints

    Keene Village Plastics

    KVP FibreTuff PAPC V - 1.75mm 375g

    MSRP: $189.00
    $79.95
    375g 1.75mm PAPC V by Keene Village Plastics Also available in 750g Polyamide, Polyolefin and Cellulose (PAPC) filament utilizes all FDA compliant ingredients for producing compounds that include pellets, filaments and powders in 3D...
    MSRP: $189.00
    $79.95
  • PPSU 3D4Makers 3D4Makers PPSU Filament

    3D4MAKERS

    3D4Makers PPSU - 1.75mm 200g

    $105.00
    PPSU Filament by 3D4MAKERS - 1.75mm 200g PPSU (Polyphenylsulfone) is a high performance thermoplastic offering better impact resistance and chemical resistance than PEI. Although not as high performance as PEEK, PPSU is less expensive and with...
    $105.00
  • FibreTuff PAPC Filament PAPC sample prints

    Keene Village Plastics

    KVP FibreTuff PAPC V - 1.75mm 750g

    MSRP: $189.00
    $139.00
    750g 1.75mm PAPC V by Keene Village Plastics Also available in 375g Polyamide, Polyolefin and Cellulose (PAPC) filament utilizes all FDA compliant ingredients for producing compounds that include pellets, filaments and powders in 3D...
    MSRP: $189.00
    $139.00
  • PEI Ultem 1010 3D4Makers PEI Ultem 1010  Label

    3D4MAKERS

    3D4Makers PEI (Ultem 1010) 1.75mm 500g

    $169.95
    3D4Makers PEI Ultem 1010 filament - 1.75mm 500g  Also available in 200g PEI (Polyether Imide) Ultem is an amorphous, amber-transparent thermoplastic with a glass transition temperature (Tg) of 217 °C and performs in continuous use up...
    $169.95
  • PEI Ultem 9085 3D4Makers

    3D4MAKERS

    3D4Makers PEI (Ultem 9085) 1.75mm 500g

    $169.95
    3D4Makers PEI Ultem 9085 - 1.75mm 500g PEI (Polyether Imide) Ultem is an amorphous, amber-transparent thermoplastic with a glass transition temperature (Tg) of 217 °C and performs in continuous use up to 170 °C. This inherently flame...
    $169.95
  • PeekQ by 3D4MAKERS Peek Q filament label

    3D4MAKERS

    3D4Makers PEEK Q - 1.75mm 200g

    $199.00
    The 3D4MAKERS PEEKQ - a higher flow PEEK with better printability, created for manufacturing Feedback indicated that PEEK was a difficult material to 3D print, as PEEK requires excellent thermal control of your build chamber during 3D printing. Many...
    $199.00
  • 3D4MAKERS PEEK

    3D4MAKERS

    3D4Makers PEEK - 1.75mm 200g

    $199.00
    PEEK (Polyether Ether Ketone) Filament by 3D4Makers PEEK is a semicrystalline thermoplastic with excellent mechanical and chemical resistance properties that are retained to high temperatures. PEEK is regarded as one of the highest performing...
    $199.00
  • PEEK 3D Printing Filament

    3D4MAKERS

    3D4Makers PEEK Q - 1.75mm 750g

    MSRP: $599.00
    $559.00
    The 3D4MAKERS PEEKQ Filament - 1.75mm 750g A higher flow PEEK with better printability. Created for manufacturing.  Feedback indicated that PEEK was a difficult material to 3D print, as PEEK requires excellent thermal control of your build chamber...
    MSRP: $599.00
    $559.00