PETG HDglass - See Through (Translucent) Blue - 1.75mm 750g | Formfutura

Formfutura HGDglass PETG

HDglass is a heavy duty, premium PETG filament that prints with a high gloss finish.

Color: See Through Blue (Translucent) 
Diameter: 1.75mm
Weight: 750g

Print Settings
These settings are meant as a starting point to help find optimal print settings. They should work for most 3D printers; however, you may need to experiment outside these ranges to find the best setting for your printer.
Print Temp: ± 235-260°C
Bed Temp: ± 80-90°C
Fan Speed: 10-30%
Print Speed: Medium to High Speed
Print Surface: Glass, BuildTak Original, PEI, Kapton Tape. Use a coat of Dimafix, if needed.