PLA - Black - 1.75mm | Polymaker PolyLite™

SKU:
PM-PL-BLK-175-1KG
UPC:
6938936705253
MPN:
PM70966
Condition:
New
$22.99

Description

Polymaker PolyLite PLA

This is our favorite low cost PLA. We think it prints above it's price point and is what we use for all of our prototyping and final prints where PLA is sufficient for the end use. 

Color: Black
Diameter: 1.75mm
Weight: 1kg

PolyLite™ PLA is a high-quality PLA designed for reliability and ease of printing.

PolyLite™ PLA features Jam-Free™ technology: Jam-Free™ technology improves the heat stability of Polymaker’s PLA filaments with softening temperatures over 140 °C. As a result, Polymaker’s PLA filaments show minimal softening in the “cold end” and can melt rapidly once entering the heating zone, leading to excellent printing quality with less risk of nozzle jams.

jam-free.jpg

Print Settings
Based on 0.4 mm nozzle and Simplify 3D v.3.1. Printing conditions may vary with different printers and nozzle diameters
Nozzle: 190˚C – 230˚C
Bed: 25˚C – 60˚C
Fan Speed: 100%
Print Speed: 40mm/s – 60mm/s
Print Surface: Glass with glue, Blue Tape, BuilTak®
Drying Settings: 55˚C for 6h

Recommended Support Materials: PolySupport™ or PolyDissolve

Mechanical Properties
Young’s Modulus: 2636 ± 330 Mpa
Tensile Strength: 46.6 ± 0.9 Mpa
Bending Strength: 85.1 ± 2.9 Mpa
Charpy Impact Strength: 2.7 ± 0.2 kJ/m2

Thermal Properties
Glass Transition Temperature: 61˚C
Vicat Softening Temperature: 63˚C
Melting Temperature: 150˚C

 

View AllClose

Additional Information

Category:
Filament
Weight:
1 kg
Diameter:
1.75 mm
Color:
Black
Material:
PLA
View AllClose