PolyMax™ PC (Black) 1.75mm - 3kg | Special Order

Nozzle Temperature:
250˚C – 270˚C

Printing Speed:
30mm/s – 50mm/s

Bed Temperature:
90˚C – 105˚C

Bed Surface:
BuildTak or Glass with a coat of DimaFix

Cooling Fan:
OFF

Based on 0.4 mm nozzle and Simplify 3D v.3.1. Printing conditions may vary with different printers and nozzle diameters

Young’s Modulus:
2048 ± 66 Mpa

Tensile Strength:
59.7 ± 1.8 Mpa

Bending Strength:
94.1 ± 0.9 Mpa

Charpy Impact Strength:
25.1 ± 1.9 kJ/m2

Glass Transition Temperature:
113˚C

Vicat Softening Temperature:
117˚C

Melting Temperature:
N/A

Drying Settings:
80˚C for 8h

Recommended Support Materials:
PolySupport™

Other:
When printing with PolyMax™ PC it is recommended to use an enclosure. For large part it is recommended to use a heated chamber.
It is recommended to anneal the printed part right after the printing process to release the residual internal stress.
Annealing settings: 100˚C for 2h