PolySmooth Transparent - 1.75mm 750g | Polymaker

  • Polymaker Polysmooth Transparent
  • PolySmooth sample

Sold Out - Notify me when back in stock


Transparent PolySmooth Filament - designed specifically to be used in the Polysher

1.75mm Transparent, 750g spool 

(In case you were wondering: PolySmooth is neither PLA nor ABS; it is a new material based on PVB - polyvinyl butyral - formulated and designed specifically for “smoothability.”)

Polymaker PolySmooth Filament Print Settings

These settings are recommended by Polymaker and are meant as a starting point to help find your optimal print settings. They should work for most 3D printers; however, you may need to experiment outside these ranges. If you find settings that work better with your printer, feel free to let us know and we will be happy to post them.

Nozzle Size: Any

Print Temp: 210-230c

Bed Temp: 0-70c

Fan Speed: 100%

Print Speed: 40-90mm/s

Retraction: 2mm

Print Surface: GeckoTek, BuildTak, Kapton Tape. Use a coat of Dimafix, if needed.

Other: After printing, use the Polymaker Polysher to achieve desired smoothness

View AllClose