PolySupport - 1.75mm 500g | Polymaker

  • PolyMaker Support Material
  • PolySupport
  • PolySupport  - Polymaker
  • Polymaker - PolySupport 1.75mm

Sold Out - Notify me when back in stock


 PolySupport Filament by Polymaker - 1.75mm 500g

  • Great support material for PLA filaments
  • Easy to print
  • Easy to store, not sensitive to normal moisture or heat 
  • Extremely easy to remove from your print
  • No need for complicated removal processes, tools or dangerous solvents
  • Can be used on both dual extrusion (as a dedicated support material) or single-extrusion printers (as both modelling and support material)

Polymaker PolySupport Print Settings

These settings are recommended by Polymaker and are meant as a starting point to help find your optimal print settings. They should work for most 3D printers; however, you may need to experiment outside these ranges. If you find settings that work better with your printer, feel free to let us know and we will be happy to post them.

Nozzle Size: Any

Print Temp: 225-235c

Bed Temp: 0-50c

Fan Speed: 100%

Print Speed: ≤ 50 mm/s

Retraction: 2mm

Print Surface: Geckotek, BuildTak, Kapton Tape

View AllClose